Method of Initial Functions for Composite Laminated Beams
ثبت نشده
چکیده
In this paper method of initial functions is used for the study of composite laminated beams. The distribution of bending and shear stresses in composite laminated beams are different from beams of small thickness. The equations of two dimensional elasticity have been used for deriving governing equations. The order of the derived equations depends on the stage at which the series representing the stresses and displacements are truncated. No assumptions
منابع مشابه
Modal Characteristics of Composite Beams with Single Delamination- A Simple Analytical Technique
In the present research, the effects of delamination size and location on vibration characteristics of laminated composite beams are investigated both analytically and numerically. In the analytical method, the delaminated beam is modeled as four interconnected Euler–Bernoulli beams and the constrained and free mode models are both simulated. The differential stretching and the bending-extensio...
متن کاملVibration suppression analysis for laminated composite beams embedded actuating magnetostrictive layers
This paper presents the analysis of vibration control of a laminated composite beam that including magnetostrictive layers. The formulation of problem is presented based on the shear deformation beam theory. For vibration suppression, the velocity feedback control with constant gain distributed is considered. Navier's method is applied to analyze the solution of vibration suppression of laminat...
متن کاملNumerical Analysis of Composite Beams under Impact by a Rigid Particle
Analysis of a laminated composite beam under impact by a rigid particle is investigated. The importance of this project is to simulate the impact of objects on small scale aerial structures. The stresses are considered uni- axial bending with no torsion loading. The first order shear deformation theory is used to simulate the beam. After obtaining kinematic and potential energy for a laminated ...
متن کاملBuckling and vibration analysis of angle -ply symmetric laminated composite plates with fully elastic boundaries
The main focus of this paper is on efficiency analysis of two kinds of approximating functions (characteristic orthogonal polynomials and characteristic beam functions) that have been applied in the Rayleigh-Ritz method to determine the non-dimensional buckling and frequency parameters of an angle ply symmetric laminated composite plate with fully elastic boundaries. It has been observed that o...
متن کاملA Quasi-3D Polynomial Shear and Normal Deformation Theory for Laminated Composite, Sandwich, and Functionally Graded Beams
Bending analyses of isotropic, functionally graded, laminated composite, and sandwich beams are carried out using a quasi-3D polynomial shear and normal deformation theory. The most important feature of the proposed theory is that it considers the effects of transverse shear and transverse normal deformations. It accounts for parabolic variations in the strain/stress produced by transverse shea...
متن کامل