Applicability of Full Function Points for Siemens at -
نویسندگان
چکیده
The following report will give an overview of core concepts and definitions of the FFP technique and first experiences in applying the FFP technique to a typical Siemens AT product. A set of rules will be given to illustrate the feasibility of a mapping from the requirement specification document on to the FFP model. The report concludes with an estimation of the impact of FFP on the software development process at Siemens AT.
منابع مشابه
Benchmarking of Siemens Linac in Electron Modes: 8-14 MeV Electron Beams
Introduction: Radiation therapy using electron beams is a promising method due to its physical dose distribution. Monte Carlo (MC) code is the best and most accurate technique for forespeaking the distribution of dose in radiation treatment of patients.Materials and Methods: We report an MC simulation of a linac head and depth dose on central axis, along with profile calculations. The purpose o...
متن کاملMonte Carlo Simulation of Siemens Primus plus Linac for 6 and 18 MV Photon Beams
Objective: The aim of the present study is to simulate 6 MV and 18 MV photon beam energies of a Siemens Primus Plus medical linear accelerator (Linac) and to verify the simulation by comparing the results with the measured data.Methods: The main components of the head of Siemens Primus Plus linac were simulated using MCNPX Monte Carlo (MC) code. To verify the results, experimental data of perce...
متن کاملCharacteristic Points of Stress-Strain Curve at High Temperature
Determination of critical points on hot stress-strain curve of metals is crucial in thermo-mechanical processes design. In this investigation a mathematical modeling is given to illustrate the behavior of metal during hot deformation processes such as hot rolling. The critical strain for the onset of dynamic recrystallization has been obtained as a function of strain at the maximum stress. In a...
متن کاملفرمولبندی تحلیلی فاکتورهای درمانی در درمان بیماران سرطانی با پرتوهای الکترونی
Background and purpose: Electron beams are extensively used in superficial cancer therapy. Unlike photon therapy, percentage depth dose curves (PDD) do not specify a maximum point in high energy electron therapy and include a depth range. The aim of this study was to obtain PDD by an analytical formulation which can be helpful to acquire the size of treatment area and other treatment factors su...
متن کاملBenchmarking of Monte Carlo model of 6 Mv photon beam produced by Siemens Oncor® linear accelerator: determination of initial electron beam parameters in comparison with measurement
Introduction: The aim of this study was to investigate the initial electron beam parameters for Monte Carlo model of 6MV photon beam produced by Siemens Oncor® linear accelerator. Materials and Methods: In this study, the EGSnrc Monte Carlo user codes BEAMnrc and DOSXYZnrc were used. The beamnrc code were used for modelling of a 6 MV photon beam produced by...
متن کامل