The wireless identification of passive and chipless EM sensors may be based on multi-band microwave resonators for encoding data into a specific spectral signature or microwave barcode [9]-[11]. By using an Ultra-WideBand
نویسندگان
چکیده
The wireless measurement of various physical quantities from the analysis of the RADAR Cross Sections variability of passive electromagnetic sensors is presented. A millimetre-wave Frequency-Modulated Continuous-Wave RADAR is used for both remote sensing and wireless identification of sensors. Long reading ranges (up to some decameters) may be reached at the expense of poor measurement resolution (typically 10%).
منابع مشابه
A Planar, Layered Ultra-wideband Metamaterial Absorber for Microwave Frequencies
In this paper, an ultra-wideband metamaterial absorber is designed and simulated. The proposed absorber is planar and low profile. It is made of a copper sheet coated with two dielectric layers. Each unit cell of the metamaterial structure is composed of multiple metallic split rings, which are patterned on the top and middle boundaries of the dielectrics. The designed absorber utilizes differe...
متن کاملAn Improved CPW-Fed Printed UWB Antenna With Controllable Band-notched Functions
A newly designed printed slot antenna is presented that incorporates variable two band-notched functions for ultra-wideband (UWB) applications. The two band notches of this coplanar waveguide (CPW) fed antenna are achieved by an M-shaped slot (MSS) embedded in the radiating element and a C-shaped strip (CSS) close to ground plane, therefore two very narrow rejected properties in the wireless lo...
متن کاملNew Low Cost Printed Antenna CPW-Fed for Global Positioning System, Personal Communication System and Worldwide Interoperability for Microwave Access Band Applications (TECHNICAL NOTE)
This paper presents a new design of a CPW-Fed multi bands planar antenna. This antenna can be integrated easily with passive and active elements. The proposed antenna is suitable to operate for GPS, PCS and WiMAX bands. Its entire area is 52.3x52.6mm2 and is employed on an FR-4 epoxy substrate and fed by a 50 Ohm coplanar line. The antenna parameters have been analyzed and optimized by using AD...
متن کاملDesign of the Novel Band Notched UWB Antenna with the Spiral Loop Resonators
In this paper, a novel configuration of circular ultra-wideband (UWB) antenna with band rejection characteristic is presented. In order to obtain this characteristic, the spiral loop resonators resonating at the rejection frequency are located in both sides of the circular radiating patch. This novel structure provides the band-notched characteristic without the degradation of the UWB antenna p...
متن کاملMulti Attribute Analysis of a Novel Compact UWB Antenna with Via-fed Elements for Dual Band Notch Function (RESEARCH NOTE)
A compact microstrip-fed antenna with dual notched bands is proposed. First, a simple basic configuration is presented for Ultra Wide Band (UWB) applications and then the dual band notched structure is extended from the UWB one. The basic structure of the UWB antenna consists of a simple square radiating patch and a ground plane with a wide square slot on back of the substrate. A semi-circle sh...
متن کامل