Porosity Study of Synthetic Sandstones by Non-Destructive Nuclear Techniques
نویسندگان
چکیده
In this paper nuclear techniques were used to describe the structural characteristics of ceramic samples. These samples were produced mainly with silica to simulate sandstones. Three sets of samples with different characteristics were analyzed using gamma ray transmission to obtain point by point porosity and X-ray microtomography to obtain the porosity, for 2D sections and the scanned bulk, as well as the pore size distribution. The transmission results indicated total porosity values of 28.6 (4.5)% for the group of samples called ceramic I and 59.6 (2.1)% for ceramic II. The samples analyzed by microtomography achieved resolutions of 1.7, 0.6 and 1.3 μm for the ceramic I, II, and III samples, respectively. This analysis indicated average porosity values of 27.9 (1.4)% for ceramic I samples and 29.4 (1.2)% for ceramic III samples.
منابع مشابه
Empirical correlation for porosity deduction from X-ray computed tomography (CT)
For obtaining reservoir petrophysical properties, for example porosity, non-destructive methods such as X-ray computed tomography, CT, seems to be precise and accurate. Porosity is deducted from the CT image with a single scan via different techniques, such as pore space detection by image segmentation techniques then correlation with porosity. More than one hundred samples with carbonate li...
متن کاملDIAGENESIS AND RESERVOIR QUALITY EVOLUTION OF SHELF-MARGIN SANDSTONES IN PEARL RIVER MOUTH BASIN, SOUTH CHINA SEA
A study of the diagenetic evolution of sandstones from Panyu low-uplift in the Pearl River Mouth Basin was carried out to unravel the controls on shelf margin sandstone reservoir quality. The reservoir rocks, Oligocene volcanic clastic sandstones of the Zhuhai Formation, have a burial depth of 2765 to 3440 m. 70 samples were studied using the granulometric analyses, X-ray diffraction (XRD) anal...
متن کاملPorosity characterization of CFRP parts by ultrasonic and X-ray tomographic non-destructive methods
Porosity is a result of a deficiency in the production process that could lead into the mechanical degradation of CFRP composite structures. Therefore, some checkpoints for determining its presence during part manufacturing have to be established, verifying that precise threshold values are not exceeded. Currently, porosity characterization is carried out by an indirect way using ultrasonic tec...
متن کاملPetrophysical and durability tests on sandstones for the evaluation of their quality as building stones using Analytical Hierarchy Process (AHP)
Due to their widespread availability, sandstones are commonly used as a natural stone for buildings, monuments and sculptures. In thecurrent study, nine sandstone samples from the Upper Red Formation (specified by the letters A, B, C, CG, S, S1, Sh, Tr and Min)were studied from a petrophysical point of view and their durability was evaluated. Then, their suitability as building stones wasassess...
متن کاملNon-destructive characterization of microdamage in cortical bone using low field pulsed NMR.
The microcracking and damage accumulation process in human cortical bone was characterized by performing cyclic loading under four-point bending at ambient temperature. A non-destructive nuclear magnetic resonance (NMR) spin-spin (T(2)) relaxation technique was applied to quantify the apparent changes in bone porosity as a function of cyclic loading and prior damage accumulation, first to unloa...
متن کامل