QSmith A Simple Tool for Designing Matched Transmission Lines
نویسنده
چکیده
– A sample transmission line, which is laid at the bottom of the GUI. There is a slider in the line that indicates the position of measurement probes. The probes are measuring the information of the line, toward the load. By default, the probe is laid next to the load. Thus the initial impedance, measured by the probe is the same as the load. It is possible to enter desired values as a load. Under the samples line, the characteristics of the load is laid. As depicted, it is essential to enter values for following parameters:
منابع مشابه
Comparison of Exact Analysis and Steplines Approximation for Externally Excited Exponential Transmission Line
In the present paper, the problem of externally excited exponential transmission line hasbeen solved analytically in frequency domain using a simple approach. Then steplines approximationas a first order approximation for the problem of externally excited nonuniform transmission lines ingeneral and exponentially tapered transmission line (ETL) as a special case has been presented.Finally the tw...
متن کاملSimulation of Single Conductors Galloping Oscillations and Estimation of their Maximum Amplitudes
Overhead transmission lines are influenced by different factors which are mostly electrical and mechanical. These factors can cause problems for lines, distortions in network and outage of line. In designing transmission lines mechanical properties are evaluated after selecting a suitable conductor and clearance with regard to electrical properties. In lines designing, an important mechanical p...
متن کاملSimulation of Single Conductors Galloping Oscillations and Estimation of their Maximum Amplitudes
Overhead transmission lines are influenced by different factors which are mostly electrical and mechanical. These factors can cause problems for lines, distortions in network and outage of line. In designing transmission lines mechanical properties are evaluated after selecting a suitable conductor and clearance with regard to electrical properties. In lines designing, an important mechanical p...
متن کاملEstimation of New Weighted Controlled Switching Overvoltage by RBFN Model
Mitigating switching overvoltages (SOVs) and conducting well-suited insulation coordination for handling stresses are very important in UHV transmission Lines. The best strategy in the absence of arresters is controlled switching (CS). Although elaborate works on electromagnetic transients are considered in the process of designing transmission systems, such works are not prevalent in day-to-da...
متن کاملFiltering Power Divider/Combiner Based on Half Mode Substrate Integrated Waveguide (HMSIW) Technology for High Power Applications
A filtering power divider/power combiner based on half mode substrate integrated waveguide technology for high power applications is proposed. This design includes one half mode substrate integrated waveguide cavity, one matched load, and four sections of quarter-wavelength transmission lines. The high isolation between output ports is obtained by combining the half mode substrate integrated wa...
متن کامل