Failing softly: a fracture theory of highly-deformable materials.

نویسندگان

  • T Goldman Boué
  • R Harpaz
  • J Fineberg
  • E Bouchbinder
چکیده

Highly-deformable materials, from synthetic hydrogels to biological tissues, are becoming increasingly important from both fundamental and practical perspectives. Their mechanical behaviors, in particular the dynamics of crack propagation during failure, are not yet fully understood. Here we propose a theoretical framework for the dynamic fracture of highly-deformable materials, in which the effects of a dynamic crack are treated with respect to the nonlinearly deformed (pre-stressed/strained), non-cracked, state of the material. Within this framework, we derive analytical and semi-analytical solutions for the near-tip deformation fields and energy release rates of dynamic cracks propagating in incompressible neo-Hookean solids under biaxial and uniaxial loading. We show that moderately large pre-stressing has a marked effect on the stress fields surrounding a crack's tip. We verify these predictions by performing extensive experiments on the fracture of soft brittle elastomers over a range of loading levels and propagation velocities, showing that the newly developed framework offers significantly better approximations to the measurements than standard approaches at moderately large levels of external loadings and high propagation velocities. This framework should be relevant to the failure analysis of soft and tough, yet brittle, materials.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Slicing softly with shear.

A soft solid is more easily sliced using a combination of normal and shearing deformations rather than diced by squeezing down on it normally with the same knife. To explain why this is so, we experimentally probe the slicing and dicing of a soft agar gel with a wire, and complement this with theory and numerical simulations of cutting of a highly deformable solid. We find that purely normal de...

متن کامل

Deflection of a hyperbolic shear deformable microbeam under a concentrated load

Deflection analysis of a simply supported microbeam subjected to a concentrated load at the middle is investigated on the basis of a shear deformable beam theory and non-classical theory. Effects of shear deformation and small size are taken into consideration by hyperbolic shear deformable beam theory and modified strain gradient theory, respectively. The governing differential equations and c...

متن کامل

Viewpoint A Cut Above the Rest

Experienced chefs know that to make a neat cut in a boiled egg or a piece of cheese, a thin wire, or even a fine piece of thread, can work better than a knife. But even a blunt knife can cut soft solids well if it is rocked back and forth while applying a gentle pressure. Understanding the balance of forces needed to make a clean cut into deformable materials could be important for developing h...

متن کامل

Simple Two Variable Refined Theory for Shear Deformable Isotropic Rectangular Beams

In this paper, a displacement-based, variationally consistent, two variable refined theory for shear deformable beams is presented. The beam is assumed to be of linearly elastic, homogeneous, isotropic material and has a uniform rectangular cross-section. In this theory, the beam axial displacement and beam transverse displacement consist of bending components and shearing components. The assum...

متن کامل

Large Amplitude Vibration of Imperfect Shear Deformable Nano-Plates Using Non-local Theory

In this study, based on nonlocal differential constitutive relations of Eringen, the first order shear deformation theory of plates (FSDT) is reformulated for vibration of nano-plates considering the initial geometric imperfection. The dynamic analog of the von Kármán nonlinear strain-displacement relations is used to derive equations of motion for the nano-plate. When dealing with nonlineariti...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • Soft matter

دوره 11 19  شماره 

صفحات  -

تاریخ انتشار 2015