Double component long period waveguide grating filter in sol-gel material.
نویسندگان
چکیده
An efficient, tunable Long Period Waveguide Grating (LPWG) filter based on a new hybrid sol-gel material is demonstrated. The LPWG exhibits an attenuation of -22 dB and a high temperature sensitivity of ~3.3 nm/ degrees C. At room temperature the device shows an almost polarization independent wavelength. We took the advantage of the UV-curable sol-gel materials and used soft lithography to demonstrate a simple approach of integrating two LPWG filters on the same structure. The gratings were fabricated on the top and on the bottom of the same ridge waveguide and operate at communication wavelengths of 1550 and 1310 nm, respectively.
منابع مشابه
An improved micro injection molding technique for grating devices
In this research, we propose a mass production method of gratings integrated with micro channels (GIMC) by means of an improved micro injection molding technique. The GIMC can be used together with a waveguide layer as a biochip in bio-medical assays. In the improved micro injection molding technique of this work, we fabricate an injection mold of gratings through the use of a nanoimprint and p...
متن کاملHybrid sol-gel silica channel waveguide Bragg grating fabrication using single-step UV patterning
A new method to fabricate Bragg gratings in hybrid sol-gel silica ridge waveguides, based on single-step 248 nm UV radiation patterning, is proposed and demonstrated. Heat treatment and UV exposure effects are analyzed.
متن کاملBragg’s grating coupler in planar optical sol-gel waveguides
The aim of our investigation was to develop a technique of producing Bragg’s grating couplers on planar waveguides obtained by means of the sol-gel technique. Introducting a light beam into the waveguide structure is in the case of planar optical systems always an essential technological problem, requiring simple and reproducible solutions without extending the waveguide structure too much. The...
متن کاملTechnology of Optical Bragg's Gratings on Planar Waveguides for Acoustooptic Applications
The aim of the presented investigations was to develop a technique of producing Bragg's gratings on planar waveguides for their application in acoustooptic structures. Waveguides are obtained by means of the sol-gel technology and they are deposited on piezoelectric plates. The introduction of a beam of light into the structure of the waveguide is in the case of planar or strip optical systems ...
متن کاملFabrication of an integrated optical filter using a large-core multimode waveguide vertically coupled to a single-mode waveguide.
We demonstrate the feasibility of the process for fabricating a single-mode waveguide and a large-core multimode waveguide aligned vertically on the same substrate. Using this process, we propose and demonstrate a filter that drops optical signal propagating in a single-mode waveguide to a multimode waveguide in the specific wavelength interval by a long-period grating. We use perfluorocyclobut...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Optics express
دوره 15 23 شماره
صفحات -
تاریخ انتشار 2007