Polymer heterostructures with embedded carbon nanotubes for efficient photovoltaic cells
نویسندگان
چکیده
Polymer photovoltaic cells (PVC) are intensely investigated because of their potential advantages over Si-based PVCs. Their present drawbacks are low conversion efficiency, limited exciton diffusion length, poor hole carriers transport and short lifetime. The highest conversion efficiency achieved so far in spincoated polymer blends is close to 5%. Recently, efficiency growing has been demonstrated in multilayer architectures involving a donor/acceptor bulk heterojunction. Alternatively, a nanomaterial has been added to the polymer active layer to facilitate excitons dissociation and carriers transport through the polymer matrix. In this work we investigate both these approaches, first embedding single wall Carbon Nanotubes (SWCNT) in the polymericmatrix to improve the electrical transport and second studying the optical absorption of different polymer thin films to optimize the spectral response of the donor/acceptor
منابع مشابه
A fullerene–single wall carbon nanotube complex for polymer bulk heterojunction photovoltaic cells
A novel immobilized fullerene–single wall carbon nanotube (C60–SWCNT) complex was synthesized via a microwave induced functionalization approach. It has been used as a component of the photoactive layer in a bulk heterojunction photovoltaic cell. As compared to a control device with only C60, the addition of SWCNTs resulted in an improvement of both the short circuit current density JSC and the...
متن کاملSingle-wall carbon nanotubeÕconjugated polymer photovoltaic devices
We report the optoelectronic properties occurring in single-walled carbon nanotubes ~SWNTs!— conjugated polymer, poly~3-octylthiophene! composites. Composite films were drop or spin cast from a solution on indium–tin oxide ~ITO! and quartz substrates and studied using absorption spectroscopy and electrical characterization methods. Diodes ~Al/polymer-nanotube composite/ ITO! with a low nanotube...
متن کاملNano-Engineering of Hybrid Organic Heterojunctions with Carbon Nanotubes to Improve Photovoltaic Performance
Organic-inorganic hybrid photovoltaics are beginning to show significant promise as a low cost highly efficient route towards renewable energy generation. Of the hybrid architectures available, carbon nanotube incorporated organic photovoltaics is considered to be among the most promising. Herein, the optical and electronic effects of localizing multiwalled carbon nanotubes in the donor polymer...
متن کاملCharge Transport in Carbon Nanotubes-Polymer Composite Photovoltaic Cells
We investigate the dark and illuminated current density-voltage (J/V) characteristics of poly(2-methoxy-5-(2-ethylhexyloxy)1-4-phenylenevinylene) (MEHPPV)/single-walled carbon nanotubes (SWNTs) composite photovoltaic cells. Using an exponential band tail model, the conduction mechanism has been analysed for polymer only devices and composite devices, in terms of space charge limited current (SC...
متن کاملMechanical material characterization of an embedded Carbon nanotube in polymer matrix by employing an equivalent fiber
Effective elastic properties for carbon nanotube reinforced composites are obtained through a variety of micromechanics techniques. An embedded carbon nanotube in a polymer matrix and its surrounding interphase is replaced with an equivalent fiber for predicting the mechanical properties of the carbon nanotube/polymer composite. The effects of an interphase layer between the nan...
متن کامل