Polymer heterostructures with embedded carbon nanotubes for efficient photovoltaic cells

نویسندگان

  • F. Previti
  • S. Patanè
  • M. Allegrini
چکیده

Polymer photovoltaic cells (PVC) are intensely investigated because of their potential advantages over Si-based PVCs. Their present drawbacks are low conversion efficiency, limited exciton diffusion length, poor hole carriers transport and short lifetime. The highest conversion efficiency achieved so far in spincoated polymer blends is close to 5%. Recently, efficiency growing has been demonstrated in multilayer architectures involving a donor/acceptor bulk heterojunction. Alternatively, a nanomaterial has been added to the polymer active layer to facilitate excitons dissociation and carriers transport through the polymer matrix. In this work we investigate both these approaches, first embedding single wall Carbon Nanotubes (SWCNT) in the polymericmatrix to improve the electrical transport and second studying the optical absorption of different polymer thin films to optimize the spectral response of the donor/acceptor

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A fullerene–single wall carbon nanotube complex for polymer bulk heterojunction photovoltaic cells

A novel immobilized fullerene–single wall carbon nanotube (C60–SWCNT) complex was synthesized via a microwave induced functionalization approach. It has been used as a component of the photoactive layer in a bulk heterojunction photovoltaic cell. As compared to a control device with only C60, the addition of SWCNTs resulted in an improvement of both the short circuit current density JSC and the...

متن کامل

Single-wall carbon nanotubeÕconjugated polymer photovoltaic devices

We report the optoelectronic properties occurring in single-walled carbon nanotubes ~SWNTs!— conjugated polymer, poly~3-octylthiophene! composites. Composite films were drop or spin cast from a solution on indium–tin oxide ~ITO! and quartz substrates and studied using absorption spectroscopy and electrical characterization methods. Diodes ~Al/polymer-nanotube composite/ ITO! with a low nanotube...

متن کامل

Nano-Engineering of Hybrid Organic Heterojunctions with Carbon Nanotubes to Improve Photovoltaic Performance

Organic-inorganic hybrid photovoltaics are beginning to show significant promise as a low cost highly efficient route towards renewable energy generation. Of the hybrid architectures available, carbon nanotube incorporated organic photovoltaics is considered to be among the most promising. Herein, the optical and electronic effects of localizing multiwalled carbon nanotubes in the donor polymer...

متن کامل

Charge Transport in Carbon Nanotubes-Polymer Composite Photovoltaic Cells

We investigate the dark and illuminated current density-voltage (J/V) characteristics of poly(2-methoxy-5-(2-ethylhexyloxy)1-4-phenylenevinylene) (MEHPPV)/single-walled carbon nanotubes (SWNTs) composite photovoltaic cells. Using an exponential band tail model, the conduction mechanism has been analysed for polymer only devices and composite devices, in terms of space charge limited current (SC...

متن کامل

Mechanical material characterization of an embedded Carbon nanotube in polymer matrix by employing an equivalent fiber

Effective elastic properties for carbon nanotube reinforced composites are obtained through a variety of micromechanics techniques. An embedded carbon nanotube  in  a  polymer  matrix  and  its surrounding  interphase  is  replaced with an equivalent fiber for  predicting  the  mechanical  properties of  the  carbon  nanotube/polymer composite. The effects of an interphase layer between the nan...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2009