Organic/Organic Heterointerface Engineering to Boost Carrier Injection in OLEDs

نویسندگان

  • Mohammadreza Fathollahi
  • Mohsen Ameri
  • Ezeddin Mohajerani
  • Ebrahim Mehrparvar
  • Mohammadrasoul Babaei
چکیده

We investigate dynamic formation of nanosheet charge accumulations by heterointerface engineering in double injection layer (DIL) based organic light emitting diodes (OLEDs). Our experimental results show that the device performance is considerably improved for the DIL device as the result of heterointerface injection layer (HIIL) formation, in comparison to reference devices, namely, the current density is doubled and even quadrupled and the turn-on voltage is favorably halved, to 3.7 V, which is promising for simple small-molecule OLEDs. The simulation reveals the (i) formation of dynamic p-type doping (DPD) region which treats the quasi Fermi level at the organic/electrode interface, and (ii) formation of dynamic dipole layer (DDL) and the associated electric field at the organic/organic interface which accelerates the ejection of the carriers and their transference to the successive layer. HIIL formation proposes alternate scenarios for device design. For instance, no prerequisite for plasma treatment of transparent anode electrode, our freedom in varying the thicknesses of the organic layers between 10 nm and 60 nm for the first layer and between 6 nm and 24 nm for the second layer. The implications of the present work give insight into the dynamic phenomena in OLEDs and facilitates the development of their inexpensive fabrication for lighting applications.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Using lithium carbonate-based electron injection structures in high-performance inverted organic light-emitting diodes.

A lithium carbonate-based bi-layered electron injection layer was introduced into inverted organic light-emitting diodes (OLEDs) to reduce operation voltages and achieve carrier balance. Ultraviolet photoemission spectroscopy was used to confirm the existence of an interfacial dipole between the organic and lithium carbonate layers, which is a dominating factor related to the device performance...

متن کامل

Influences of Device Architectures on Characteristics of Organic Light-Emitting Devices Incorporating Ambipolar Blue-Emitting Ter(9,9-diarylfluorenes)

In this article, we report the studies of various device architectures of organic lightemitting devices (OLEDs) incorporating highly efficient blue-emitting and ambipolar carriertransport ter(9,9-diarylfluorene)s, and their influences on device characteristics. The device structures investigated include single-layer devices and multilayer heterostructure devices employing the terfluorene as one...

متن کامل

Dependence of the Current and Power Efficiencies of Organic Light-Emitting Diode on the Thickness of the Constituent Organic Layers

The dependence of the current and power efficiencies of bi-layer organic light-emitting diodes (OLEDs) on the thickness of the constituent organic layers is reported. The thickness of the electron and hole transport layers was simultaneously varied to determine the optimal configuration for power efficiency. It was verified that the inclusion of a suitable electrode buffer layer reduced the eff...

متن کامل

Field Emission Organic Light Emitting Diode

In recent years, the developments in the OLEDs have gradually reached very advantageous of existence. These advantageous characteristics include self-luminous, wide viewing angle and low power consumption, etc. which make OLEDs very useful for numerous display applications and lighting devices. To effectively improve the characteristics of an OLEDs, there are many ways to be adopted. Such as: (...

متن کامل

Thin-film Encapsulation of Organic Light-Emitting Diodes Using Single and Multilayer Structures of MgF2, YF3 and ZnS

In this research, the lifetime of green organic light emitting diodes (OLEDs) is studied using four passivation layers. To encapsulate the OLEDs, MgF2, YF3, composed of alternating MgF2/ZnS and YF3/ZnS layers were grown by thermal vacuum deposition. Measurements show that the device lifetime is significantly improved by using YF3 and ZnS as passivation layers. However, diodes encapsulated by Mg...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 7  شماره 

صفحات  -

تاریخ انتشار 2017