A Realization Method of Protocol Conversion Between Modbus and IEC61850
نویسندگان
چکیده
In order to adapt to the construction needs of the smart grid, smart substation need to solve the problem of protocol conversion between the conventional non-standardized condition monitoring equipment and the standardized monitoring system. This paper proposed a realization method of conversion method between Modbus and IEC61850. Object-oriented technology is used for information model on Modbus. After the analysis of IEC61850 and MMS information and service model, to establish the model mapping relationship between IEC61850, MMS and Modbus based on the principle of minimum information point which is one to one correspondence. Combined with the implementation of SISCO MMS-EASE LITE software development kit programming, giving a realization method using QT programming techniques based on the mapping model. Finally, the establishment the interval controller as an example of protocol scheme verifies the correctness and the feasibility of protocol conversion method.
منابع مشابه
Practical Applications of IEC61850 Protocol in Industrial Facilities
Various communication protocols are used within a typical industrial facility including Modbus RTU, DeviceNet and Profibus. These protocols used over the years have been in a Master-Slave configuration. Intelligent Electronic Devices (IEDs) are slaves to single or multiple masters with one-way communication with the IED acting as a data/controlled node to the master device. Control is implement...
متن کاملImplementing MOD bus and CAN bus Protocol Conversion Interface
A number of field buses are available to exchange the serial data among one or more controllers and a number of field devices that are communicating with each other. However, field bus standards are not uniform at present, which brings many difficulties in system design, as different equipments from different manufacturers follow different standards. For a reliable system design there is a need...
متن کاملImplementation of Serial Communication between PC and DSP Processor Using Modbus Protocol
This paper described the principle, application and implementation of serial communication between PC and a Digital Signal Processor (DSP). The TMS320F28031 which is a type of DSPs made by Texas Instruments (TI) is used in this implementation. This DSP processor has serial communication interface (SCI) module for serial communication. The SCI is a two−wire asynchronous serial port, commonly kno...
متن کاملFormal Modeling and Analysis of the Modbus Protocol
Modbus is a communication protocol widely used in SCADA systems and distributed control applications. This report describes formal models of the Modbus protocol. Two formalizations of Modbus are presented: the first was developed using the PVS generic theorem prover and the second was developed using SAL, an environment for automatic analysis of state-transition systems using model checking too...
متن کاملSecurity Analysis of Multilayer Scada Protocols: a Modbus Tcp Case Study
The layering of protocols in critical infrastructure networks – exemplified by Modbus TCP in the oil and gas sector and SS7oIP in the telecommunications sector – raises important security issues. The individual protocol stacks, e.g., Modbus and SS7, have certain vulnerabilities, and transporting these protocols using carrier protocols, e.g., TCP/IP, brings into play the vulnerabilities of the c...
متن کامل