Polybenzoxazine as a mold-release agent for nanoimprint lithography.
نویسندگان
چکیده
One of the most important tasks remaining to be resolved in nanoimprint lithography is the elimination of the resist sticking to the mold during demolding. Previously, the main approach was to apply a thin layer of fluorinated alkyl silane mold-release agent on the surface on the mold; however, this involves complicated steps and high costs. The low surface free energy material polybenzoxazine provides an efficient mold-release agent for silicon molds that is easier to process, costs less, and has no side reactions.
منابع مشابه
Silicon nanopillar anodes for lithium-ion batteries using nanoimprint lithography with flexible molds
Articles you may be interested in In situ cycling and mechanical testing of silicon nanowire anodes for lithium-ion battery applications Appl. Fabrication of silicon template with smooth tapered sidewall for nanoimprint lithography High aspect ratio fine pattern transfer using a novel mold by nanoimprint lithography Sub-200 nm gap electrodes by soft UV nanoimprint lithography using polydimethyl...
متن کاملSiloxane Copolymers for Nanoimprint Lithography**
Nanoimprint lithography (NIL) is a fabrication technology that offers high-throughput, ultrahigh resolution patterning at great cost savings compared to most competing next-generation radiative lithography methods. As a result of its rapid development in the past decade and its potential for sub-100 nm lithography, NIL has been listed by MIT’s Technology Review as one of ten emerging technologi...
متن کاملFluorinated organic-inorganic hybrid mold as a new stamp for nanoimprint and soft lithography.
In this paper, we fabricated a fluorinated organic-inorganic hybrid mold using a nonhydrolytic sol-gel process which can produce a crack-free mold without leaving any trace of solvent. No special chemical treatment of a release layer is needed because the fluorinated hybrid mold has fluorine molecules in the backbone. The other advantages of the hybrid mold are thermal stability over 300 degree...
متن کاملMold cleaning with polydimethylsiloxane (PDMS) for nanoimprint lithography
We present a simple and effective mold cleaning method for nanoimprint lithography. Polydimethylsiloxane (PDMS) prepolymer is spin-coated onto a contaminated imprint mold, thermally cured in ambient environment, and then peeled off afterwards. Contaminants of 100s m to sub-50 nm sizes are effectively cleaned within one cycle. During the cleaning process, a very thin PDMS film (1~2 nm) is unifo...
متن کاملA combined-nanoimprint-and-photolithography patterning technique
We propose a new lithography technique that combines the advantages of nanoimprint lithography (NIL) and photolithography. In this combined-nanoimprint-and-photolithography (CNP) technique, we introduce a hybrid maskmold made from UV transparent material and with a light-blocking metal layer placed on top of the mold protrusions. We demonstrate that the CNP method using such a hybrid mold can a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Langmuir : the ACS journal of surfaces and colloids
دوره 23 11 شماره
صفحات -
تاریخ انتشار 2007