A Development of Class E Converter Circuit for Loosely Coupled Inductive Power Transfer System
نویسندگان
چکیده
This paper presents an Inductive Power Transfer (IPT) system design using a Class E converter circuit. The Class E converter is used to drive a nonlinear load and theoretically it offers 100% efficiency. To be specifically, the performance of IPT system at 1MHz operating frequency and 9V DC supply voltage is analyzed. Voltage doubler rectifier and Darlington circuit are proposed in this paper to maximize output power. Moreover, to ensure the resonant inductive coupling in IPT system,capacitor compensation is also proposed in this work. Based on the experimental results, the output power with the capacitor compensation circuit is 1.6W at 15 mm air gap distance is better than the circuit without a capacitor compensation. Key-Words: IPT system, Class E converter circuit, Voltage doubler and Darlington circuit.
منابع مشابه
Implementation of Identical Spiral Square Inductive Coils for Wireless EV Battery Charging Application
In recent years, the popularity of wireless inductive power transfer (WIPT) system for electric vehicle battery charging (EVBC) is always ever-increasing. In the WIPT inductively coupled coil structure is the heart of the system and the mutual inductance (MI) between the coupled coils is the key factor for effective power transfer. This paper presents the analysis of mutual inductance between t...
متن کاملInductively coupled wireless power transfer with class-E2 DC-DC converter
This paper proposes an inductive coupled wireless power transfer (WPT) system with class-E2 dc-dc converter along with its design procedure. The proposed WPT system can achieve high power-conversion efficiency at high frequencies because it satisfies the class-E zero-voltage switching and zero-derivative-voltage switching conditions on both the inverter and the rectifier. By using the class-E i...
متن کاملA New System of Contactless Power Transfer with Low Voltage Stress and Parasitic Capacitors Effect
In this paper, a high frequency contactless power transfer (CPT) system is designed with ∅2 inverter drive. This system works in 30MHz frequency and 380W power with low voltage stress and considers the inductive link parasitic capacitor effect. In the design, we formulated the inverter equations first and then suggested another design for the transmitter and the receiver coils as the energy tra...
متن کاملInfluence of Converter and inverter on dynamic behavior of the GMAW process
This paper investigates the dynamic behavior of Gas Metal Arc Welding (GMAW) process for two types of power supplies –inverter and rectifier- for short circuit transfer mode. The large ripples on the rectifier power source are able to perturb the metal transfer mode. In this experimental work some operating points in the short circuit mode have been selected using an automatic pipeline welding ...
متن کاملA Developed Structure of Step-Up DC/DC Converter by Using Coupled Inductor and Active Clamped Circuit
In this paper, a new structure of step-up dc-dc converter by using coupled inductor and active-clamped circuit is proposed. The proposed converter generates high voltage gain in comparison with the conventional dc-dc converters. Duo to using active-clamped circuit in the proposed topology the voltage stress on main switch is reduced. In addition the zero voltage switching (ZVS) in ON-state of m...
متن کامل