Numerical prediction of brake friction pair vibration using dynamics green's function

نویسندگان

  • Muhammad Zahir Hassan
  • Frank Delbressine
  • Matthias Rauterberg
چکیده

The prediction capability of the brake system vibration is still unable to cover a broad range of frequencies. Current predictive models are contained within a particular range to cater for specific vibration types. Therefore, a numerical model which could make predictions in a broad spectrum range is required. The model presented in this paper is derived with such aim. The model is derived from the interaction between the friction pairs with the focus on the brake pad. The brake disc is simplified as a travelling sinusoidal wave. Where else, the brake pad is modelled as a EulerBernoulli beam with forces and distributed friction acting upon it. The Dynamic Green Equation applied in solving the derived friction pair equation. The outcome of the developed model predicted brake pad vibrational frequency coinciding accurately with brake dynamometer experimental results. Therefore, the validated model could be a viable prediction and study tool for various brake system parameters.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Instability prediction of brake squeal by nonlinear stability analysis

ABSTRACT Prediction of brake squeal as unwanted high frequency noise above 1 kHz remains a challenging problem despite substantial research efforts in the past two decades. Brake squeal, triggered by friction-induced self-excited vibration, can be caused by many different and interacting mechanisms with nonlinear origins in material properties and boundary conditions. Although brake squeal is e...

متن کامل

Experimental analysis on squeal modal instability

In this paper, an experimental analysis performed on a simplified brake apparatus is presented. Brake squeal is a major concern in braking design. During past years a common approach for squeal prediction was the complex eigenvalues analysis. Squeal phenomenon is treated like a dynamic instability. When two modes of the brake system couple at the same frequency, one of them becomes unstable lea...

متن کامل

Instability prediction of a fully updated brake system with uncertainty in contact conditions

Brake squeal, as friction-induced audible noise above 1 kHz to 20 kHz, is a major concern to automotive manufacturers because of noise, vibration and harshness performance and warranty-claim related costs. The prediction of brake squeal is as difficult as ever due to nonlinearities, uncertainty boundary and operating conditions. The exact contact conditions between pad linings with rotor are of...

متن کامل

Vibration of Road Vehicles with Non linear Suspensions

In order to investigate the effects of non-linear springs in vibrating behavior of vehicles, the independent suspension of conventional vehicles could be modeled as a non-linear single degree of freedom system. The equation of motion for the system would be a non-linear third order ordinary differential equation, when considering the elasticity of rubber bushings in joints of shock absorber. It...

متن کامل

Structural modifications for squeal noise reduction: numerical and experimental validation

Squeal is an example of noise caused by vibrations induced by friction forces that lead to dynamic instability of the brake system. Several experimental, theoretical and numerical works have been carried out over the last six decades. Certain of these works have focused on simplified brake systems and identified ‘lock-in’ instability as being the cause of squeal. This paper presents a short bib...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2016