System Identification of MEMS Vibratory Gyroscope Sensor
نویسندگان
چکیده
Fabrication defects and perturbations affect the behavior of a vibratory MEMS gyroscope sensor, which makes it difficult to measure the rotation angular rate. This paper presents a novel adaptive approach that can identify, in an online fashion, angular rate and other system parameters. The proposed approach develops an online identifier scheme, by rewriting the dynamic model of MEMS gyroscope sensor, that can update the estimator of angular rate adaptively and converge to its true value asymptotically. The feasibility of the proposed approach is analyzed and proved by Lyapunov’s direct method. Simulation results show the validity and effectiveness of the online identifier.
منابع مشابه
Closed-Loop Compensation of the Quadrature Error in MEMS Vibratory Gyroscopes
In this paper, a simple but effective method for compensation of the quadrature error in MEMS vibratory gyroscope is provided. The proposed method does not require any change in the sensor structure, or additional circuit in the feedback path. The mathematical relations of the proposed feedback readout system were analyzed and the proposed solution assures good rejection capabilities. Based on ...
متن کاملDesign and Simulation of MEMS Based Gyroscope
This paper represents a MEMS based gyroscope to measure orientation. Silicon-micro-machined gyro is fabricated on the basis of resonators and they use vibrating mechanical element to sense rotation. The vibratory measurement can be done by measuring the change in capacitance with respect to the voltage or force applied in particular axis. Here MEMS based gyroscope has been designed from Lame mo...
متن کاملANFIS Approach for Tracking Control of MEMS Triaxial Gyroscope
In this paper, an Adaptive Neuro Fuzzy Inference System (ANFIS) based control is proposed for the tracking of a Micro-Electro Mechanical Systems (MEMS) gyroscope sensor. The ANFIS is used to train parameters of the controller for tracking a desired trajectory. Numerical simulations for a MEMS gyroscope are looked into to check the effectiveness of the ANFIS control scheme. It proves that the sy...
متن کاملDesign of a Novel MEMS Gyroscope Array
This paper reports a novel four degree-of-freedom (DOF) MEMS vibratory gyroscope. A MEMS gyroscope array is then presented using the novel gyroscope unit. In the design of the proposed 4-DOF MEMS vibratory gyroscope, the elements of the drive-mode are set inside the whole gyroscope architecture, and the elements of sense-mode are set around the drive-mode, which thus makes it possible to combin...
متن کاملSystem Modeling of a MEMS Vibratory Gyroscope and Integration to Circuit Simulation
Recently, consumer applications have dramatically created the demand for low-cost and compact gyroscopes. Therefore, on the basis of microelectromechanical systems (MEMS) technology, many gyroscopes have been developed and successfully commercialized. A MEMS gyroscope consists of a MEMS device and an electrical circuit for self-oscillation and angular-rate detection. Since the MEMS device and c...
متن کامل