An Evaluation of the Electrostatic Shielded Induction Motor : A Solution for Rotor Shaft Voltage Buildup and Bearing Current .
نویسنده
چکیده
voltage source inverters. An example of bearing fluting is shown and system models presented and discussed. The construction details and test results for several ESIMs are presented. Experimental results show the ESIM solves the electrostatically induced rotor shaft voltage and bearing problem without degrading the electromagnetic performance of the motor.
منابع مشابه
Effect of PWM Inverters on AC Motor Bearing Currents and Shaft Voltages
wavefronts especially increase the magnitude of the above electrical problems, leading to motor bearing material erosion and early mechanical failure. Previous literature suggests that shaft voltage-bearing current problems under 60 Hz sinewave operation are predominantly electromagnetically induced. It is proposed that under PWM operation these same problems are now predominantly an electrosta...
متن کاملUsing an Appropriate Controller for Independent Current Control for Motoring of Force Windings of Bearing less Induction Motor
A bearingless induction machine has combined characteristics of induction motor and magnetic bearings. Therefore, the advantages are small size and low-cost. In the magnetic suspension of the bearingless motors, suspension forces are generated based on the feedback signals of displacement sensors detecting the movement of the rotor shaft. The suspension forces are generated taking an advantage ...
متن کاملOptimization of an HTS Induction/Synchronous Motor According to Changing of HTS Tapes Critical Current by Analytical Hierarchy Process
This paper represents the performance of a squirrel-cage High Temperature Superconducting Induction/ Synchronous Motor (HTS-ISM) based on nonlinear electrical equivalent circuit. The structure of the HTS-ISM is the same as that of the squirrel-cage type induction machine, and the secondary windings are fabricated by the use of the HTS wires. It has already been shown that based on the experimen...
متن کاملA Low Cost Sensorless Control Drive Circuit for of Low Voltage Switched Reluctance Motor
Shaft position sensing is an essential part of switched reluctance (SR) motor drive In order to synchronize the pulses of phase current with the period of rising inductance of the proper motor phase. Direct sensors such as, Hall effect and optical encoder are commonly used in SR motors. The purpose of this paper is to present an indirect shaft positioning sensing known as "sensorless " control ...
متن کاملSmart Starting of Induction Motor by Changing Core Magnetic Flux Value
Single-phase squirrel cage and three-phase induction electromotors are the most popular electromotors used in industry from long ago. When an induction motor starts with direct connection method, it takes a lot of current from the power supply (several times the nominal current); so, several methods have been devised to start such electromotors. These methods either reduce the voltage of the st...
متن کامل