Comparison of IC conducted emission measurement methods
نویسندگان
چکیده
This paper deals with the electromagnetic emissions of integrated circuits. In particular, four measurement techniques to evaluate integrated circuit conducted emissions are described in detail and they are employed for the measurement of the power supply conducted emission delivered by a simple integrated circuit composed of six synchronous switching drivers. Experimental results obtained by employing such measurement methods are presented and the influence of each test setup on the measured quantities is discussed.
منابع مشابه
Electromagnetic compatibility of integrated circuits
Through lectures (6 H) Understand parasitic emission mechanisms Introduce parasitic emission reduction strategies Give an overview of emission and susceptibility measurement standards Power Decoupling Network modelling Basis of conducted and radiated emission modelling Basis of immunity modelling Understand the role of decoupling at printed-circuit-board level Acquire basic knowledge of design ...
متن کاملComparison of alternative conducted emission measurement methods by using FSV and IELF algorithms
When performing in-situ measurements of conducted emission, it is not always possible to use a LISN (line impedance stabilisation network). This is especially the case when testing large machines, where a LISN with a high current capacity is needed. In this paper some alternative test methods are proposed to measure conducted emission. The measurements are compared to the LISN measurement and e...
متن کاملEfficient passive network description of IC conducted emission models for model reduction
This article adresses the model reduction of IC conducted emission models. A method to efficiently deal with the high number of independent sources in IC conducted emission models, which are a strong limitation for model order reduction, is presented. A network alteration is proposed, which allows for a much higher model reduction than standard approaches. The system of the altered network can ...
متن کاملMeasurement of Integrated Circuit Conducted Emissions by Using a Transverse Electromagnetic Mode (TEM) Cell
This paper presents a new technique for the measurement of integrated circuit (IC) conducted emissions. In particular, the spectrum of interfering current flowing through an IC port is detected by using a transverse electromagnetic mode (TEM) cell. A structure composed of a matched TEM cell with inside a transmission line is considered. The structure is excited by an interfering source connecte...
متن کاملModeling Technique of the Conducted Emission of Integrated Circuit under different temperatures
In this paper the temperature impact on conducted emissions of ICs up to 3 GHz has been analyzed. The electromagnetic conducted emissions of a commercial IC clock generator have been characterized and modelled from 293 K to 358 K. A temperature parametrized lumped-electrical equivalent model including the PCB and IC behaviour has been developed and validated by means of Feature Selective Valida...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- IEEE Trans. Instrumentation and Measurement
دوره 52 شماره
صفحات -
تاریخ انتشار 2003