Individual Pitch Control for Large scale wind turbines Multivariable control approach
نویسنده
چکیده
In the next decennia, upscaling even towards 10 MW wind turbines may be necessary to lower the costs of offshore wind energy. This requires considerable reductions of turbine loads. Variable speed turbines with active pitch control are most favorable and prevailing nowadays. Currently, the turbine blades are turned collectively to limit the excess of wind power and to regulate the rotor speed above rated wind conditions. To reduce the blade and tower loads, it has been shown that Individual Pitch Control (IPC) is much promising. A multivariable control concept using advanced feedbackfeedforward control method is implemented for IPC and is compared with the traditional scalar control concept. The advantage of using such a control concept is also shown.
منابع مشابه
Experimental wind tunnel testing of linear individual pitch control for two-bladed wind turbines
In this paper Linear Individual Pitch Control (LIPC) is applied to an experimental small-scale two-bladed wind turbine. LIPC is a recently introduced Individual Pitch Control (IPC) strategy specifically intended for two-bladed wind turbines. The LIPC approach is based on a linear coordinate transformation, with the special property that only two control loops are required to potentially reduce ...
متن کاملLoad Reduction on a Clipper Liberty Wind Turbine with Linear Parameter-Varying Individual Blade-Pitch Control
The increasing size of modern wind turbines also increases the structural loads caused by effects such as turbulence or asymmetries in the inflowing wind field. Consequently, the use of advanced control algorithms for active load reduction has become a relevant part of current wind turbine control systems. In this article, an individual blade-pitch control law is designed using multivariable li...
متن کاملDesigning a fuzzy PI^lambda controller to control the pitch angle in wind turbines under variant speed
One of the main tasks of the control systems in the wind turbines is to maintain the power of the wind when its wind speed proceed its nominal value. Because the failure to maintain the power in its nominal value in the region of the turbine curve damages the turbine and increases the mechanical stress. This object is obtained by controlling the pitch angle in the third region of the turbine cu...
متن کاملDifferent Types of Pitch Angle Control Strategies Used in Wind Turbine System Applications
The most common controller in wind turbine is the blade pitch angle control in order to get the desired power. Controlling the pitch angle in wind turbines has a direct impact on the dynamic performance of the machine and fluctuations in the power systems. Due to constant changes in wind speed, the wind turbines are of nonlinear and multivariate system. The design of a controller that can ad...
متن کاملRobust Control Design for Load Reduction on a Liberty Wind Turbine
The increasing size of modern wind turbines also increases the structural loads on the turbine caused by effects like turbulence or asymmetries in the inflowing wind field. Consequently, the use of advanced control algorithms for active load reduction has become a relevant part of current wind turbine control systems. In this paper, an H∞-norm optimal multivariable control design approach for a...
متن کامل