Thermal conduction in aligned carbon nanotube-polymer nanocomposites with high packing density.
نویسندگان
چکیده
Nanostructured composites containing aligned carbon nanotubes (CNTs) are very promising as interface materials for electronic systems and thermoelectric power generators. We report the first data for the thermal conductivity of densified, aligned multiwall CNT nanocomposite films for a range of CNT volume fractions. A 1 vol % CNT composite more than doubles the thermal conductivity of the base polymer. Denser arrays (17 vol % CNTs) enhance the thermal conductivity by as much as a factor of 18 and there is a nonlinear trend with CNT volume fraction. This article discusses the impact of CNT density on thermal conduction considering boundary resistances, increased defect concentrations, and the possibility of suppressed phonon modes in the CNTs.
منابع مشابه
Inter-carbon nanotube contact in thermal transport of controlled-morphology polymer nanocomposites.
Directional thermal conductivities of aligned carbon nanotube (CNT) polymer nanocomposites were calculated using a random walk simulation with and without inter-CNT contact effects. The CNT contact effect has not been explored for its role in thermal transport, and it is shown here to significantly affect the effective transport properties including anisotropy ratios. The primary focus of the p...
متن کاملMorphology effects on non-isotropic thermal conduction of aligned single- and multi-walled carbon nanotubes in polymer nanocomposites
An off-lattice Monte-Carlo simulation was used to study non-isotropic heat conduction in aligned carbon nanotube (CNT)-polymer nanocomposites (PNCs) focusing on the effects of CNT-CNT contact and CNT distribution on heat transfer. CNT-CNT contact significantly affects the effective transport properties of PNCs, including anisotropy ratios, but has not been studied extensively either theoretical...
متن کاملOn the Thermal Conductivity of Carbon Nanotube/Polypropylene Nanocomposites by Finite Element Method
In this paper, finite element method is used to obtain thermal conductivity coefficients of single-walled carbon nanotube reinforced polypropylene. For this purpose, the two-dimensional representative volume elements are modeled. The effect of different parameters such as nanotube dispersion pattern, nanotube volume percentage in polymer matrix, interphase thickness between nanotube and surroun...
متن کاملNanowire-Polymer Nanocomposites as Thermal Interface Material
Packaging of semiconductor electronic device is a challenge due to the progressive increase in the power level of operating devices which is associated with the increasing device performance. As semiconductor device feature sizes continue to be reduced, ensuring reliable operation has become a growing challenge. The effective transfer of heat from an integrated circuit (IC) and its heat spreade...
متن کاملExtremely High Thermal Conductivity of Aligned Carbon Nanotube-Polyethylene Composites
The ultra-low thermal conductivity of bulk polymers may be enhanced by combining them with high thermal conductivity materials such as carbon nanotubes. Different from random doping, we find that the aligned carbon nanotube-polyethylene composites has a high thermal conductivity by non-equilibrium molecular dynamics simulations. The analyses indicate that the aligned composite not only take adv...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- ACS nano
دوره 5 6 شماره
صفحات -
تاریخ انتشار 2011