Comparison of dynamic compression behavior of single crystal sapphireto polycrystalline alumina
نویسندگان
چکیده
Due to the considerable interest in the shock loading behavior of aluminum oxide whether it is in the polycrystalline phase or in the single crystal phase well-controlled experiments were conducted to probe differences in shock loading behavior between these two materials. Previous studies concluded that the behavior was similar but careful examination of well-controlled experiments has revealed the two materials are different.Although the experimental results appear to have the same behavior in the shock velocity vs. particle velocity plane, they are considerably different in the stressevolume compression plane and evidence is provided that indicates the single crystal remains crystalline up to the stresses imposed for this analysis. This is an extremely interesting observation since it has many implications including developing dynamic material models capable of transitioning between individual grains and polycrystalline material. 2010 Published by Elsevier Ltd.
منابع مشابه
Measurement of release wave speed in shockcompressed polycrystalline alumina and aluminum
Values of release wave speed in shock-compressed polycrystalline alumina and aluminum (2024) have been measured to 400 and 260 kbar, respectively. These values, as well as previous data for aluminum and iron, have been compared with fourth-order finite strain extrapolations of the longitudinal sound speed V o. For alumina in the pressure range 200-300 kbar and for a iron and • iron the observed...
متن کاملOn the mechanical behavior of single crystal NiTi shape memory alloys and related polycrystalline phenomenon
Room temperature monotonic and cyclic stress–strain curves for single crystal and polycrystalline NiTi shape memory alloys containing Ti3Ni4 precipitates are presented. The tensile and compressive single crystal results illustrate the importance of crystallographic texture, the unidirectional nature of the martensitic transformation, and martensite detwinning on tension-compression stress–strai...
متن کاملMechanism of ‘‘Solid-State’’ Single-Crystal Conversion in Alumina
Single crystals of Al2O3 were reproducibly grown from an MgO-doped polycrystalline precursor. The single crystals were grown through controlled abnormal grain growth at temperatures between 16701 and 19451C. It was observed that CaO impurities segregated to the boundary between the single crystal and the polycrystalline region, and formed a wetting intergranular film. This type of film is requi...
متن کاملConversion of Polycrystalline Alumina to Single-Crystal Sapphire by Localized Codoping with Silica
The effect of a localized SiO2 codoping on the conversion of polycrystalline, MgO-doped Al2O3 tubes to single-crystal sapphire was investigated. Codoping with SiO2 before sintering intentionally triggered abnormal grain growth, which resulted in the full conversion of tube surfaces to single crystal without adversely affecting densification to a almost pore-free, translucent state. The degree o...
متن کاملComparison of Creep Behavior in Alumina Based Ceramics Densified by Spark Plasma Sintering and Hot Pressing
Spark plasma sintering (SPS) method, as plasma activated sintering, is a method applicable for rapid sintering of metals and ceramics. Owing to the advantage of rapid heating, the alumina ceramics obtained by SPS have a grain size and density comparable to those of hot pressed ones. The increase of densification rate may be related to some difference in ion transport characteristics. This study...
متن کامل