High-strain sensors based on ZnO nanowire/polystyrene hybridized flexible films.

نویسندگان

  • Xu Xiao
  • Longyan Yuan
  • Junwen Zhong
  • Tianpeng Ding
  • Yu Liu
  • Zhixiang Cai
  • Yaoguang Rong
  • Hongwei Han
  • Jun Zhou
  • Zhong Lin Wang
چکیده

A type of strain sensor with high tolerable strain based on a ZnO nanowires/polystyrene nanofibers hybrid structure on a polydimethylsiloxane film is reported. The novel strain sensor can measure and withstand high strain and demonstrates good performance on rapid human-motion measurements. In addition, the device could be driven by solar cells. The results indicate that the device has potential applications as an outdoor sensor system.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Largely enhanced efficiency in ZnO nanowire/p-polymer hybridized inorganic/organic ultraviolet light-emitting diode by piezo-phototronic effect.

ZnO nanowire inorganic/organic hybrid ultraviolet (UV) light-emitting diodes (LEDs) have attracted considerable attention as they not only combine the high flexibility of polymers with the structural and chemical stability of inorganic nanostructures but also have a higher light extraction efficiency than thin film structures. However, up to date, the external quantum efficiency of UV LED based...

متن کامل

Enhanced performance of flexible ZnO nanowire based room-temperature oxygen sensors by piezotronic effect.

A flexible oxygen sensor based on individual ZnO nanowires is demonstrated with high sensitivity at room temperature and the influence of the piezotronic effect on the performance of this oxygen sensor is investigated. By applying a tensile strain, the already very high sensitivity due to the Schottky contact and pre-treatment of UV light is even further enhanced.

متن کامل

Piezotronic effect on the output voltage of P3HT/ZnO micro/nanowire heterojunction solar cells.

We report the first observation of piezotronic effect on the output voltage of a flexible heterojunction solar cell. The solar cell was fabricated by contacting poly(3-hexylthiophene) (P3HT) with one end of a ZnO micro/nanowire to form a p-n heterojunction on a flexible polystyrene (PS) substrate. The open-circuit voltage V(oc) of the solar cell was characterized by tuning the strain-induced po...

متن کامل

Piezotronic effect on the sensitivity and signal level of Schottky contacted proactive micro/nanowire nanosensors.

We demonstrated the first piezoelectric effect on the performance of a pH sensor using an MSM back-to-back Schottky contacted ZnO micro/nanowire device. When the device is subjected to an external strain, a piezopotential is created in the micro/nanowire, which tunes the effective heights of the Schottky barriers at the local contacts, consequently increasing the sensitivity and signal level of...

متن کامل

Investigating Output Voltage and Mechanical Stability of a Piezoelectric Nanogenerator Based on ZnO Nanowire

The output of a piezoelectric nanogenerator based on ZnO nanowire is largely affected by the shape of nanowire. In order to obtain mechanically stable nanogenerator with high performance, the investigation of mechanical and electrical characteristics related to the nanowires and materials used in nanogenerators are of great interest and significance. This paper presents the various behavior of ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • Advanced materials

دوره 23 45  شماره 

صفحات  -

تاریخ انتشار 2011