Electrolytes Based on Primary Ammonium Salts as Ionic Liquids for PEMFC-membranes
نویسنده
چکیده
Physico-chemical characterization of a series of salts prepared from primary amines was performed in order to obtain the salts as protonic ionic liquids (PILs). It was shown that the majority of these salts are thermally stable up to 400 °C, while the melting point of each salt depends on the nature of the anion and amine substitutions. The results of cyclic voltammetry experiments showed that the amines and the salts (HNR3 , A) could be oxidized only at very high potentials (> 1.9 V/SHE) which is compatible with their use in PEM fuel cells. Conductivities of salts at 130 °C are between 0.01 and 13 mS cm. The best conductivity was observed for the salt resulting from asymmetric amines/trifluoromethanesulfonic acid association. Incorporation of these compounds within Nafion® has also been studied, particularly with respect to the compatibility of PIL/Nafion® and conductivity of these newly formed membranes.
منابع مشابه
Ionic liquids for synthesis of nanoparticles (A review)
An ionic liquid (IL) is a salt in the liquid state. In some contexts, the term has been restricted to salts whose melting point is below some arbitrary temperature, such as 100 °C. While ordinary liquids such as water and gasoline are predominantly made of electrically neutral molecules, ionic liquids are largely made of ions and short-lived ion pairs. These substances are variously called liqu...
متن کاملAcrylate functionalized tetraalkylammonium salts with ionic liquid properties.
Acrylate functionalized ionic liquids based on tetraalkylammonium salts with terminal acrylates- and methylacrylates were synthesized. Melting points and ionic conductivity of twenty compounds in six groups were determined. Within one group the effect of three different counterions was investigated and discussed. The groups differ in cationic structure elements because of their functional group...
متن کاملElectrofinishing of metals using eutectic based ionic liquids
Ionic liquids are molten salts that have low melting points. This review concentrates upon eutectic mixtures of quaternary ammonium salts and metal salts (usually halides). These so-called eutectic based ionic liquids can be used for the electrodeposition and dissolution of a wide range of metals and alloys. The review highlights the technological challenges involved in the application of ionic...
متن کاملBPPO-Based Anion Exchange Membranes for Acid Recovery via Diffusion Dialysis
To reduce the environmental impact of acids present in various industrial wastes, improved and robust anion exchange membranes (AEMs) are highly desired. Moreover, they should exhibit high retention of salts, fast acid permeation and they should be able to operate with low energy input. In this work, AEMs are prepared using a facile solution-casting from brominated poly-(2,6-dimethyl-1,4-phenyl...
متن کاملDensity and ultrasonic sound speed measurements for N,N-dimethylformamide with ionic liquids
To understand the molecular interactions between N,N-dimethylformamide with two families of ionic liquids, the thermophysical properties such as densities and ultrasonic sound speeds have been measured over the entire composition range at 25 C under atmospheric pressure. The materials investigated in the present study include two families of ionic liquids, viz., ammonium salts and imidazolium s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2009