Geometric Design of Spatial Prr Manipulators Using Polynomial Elimination Techniques
نویسندگان
چکیده
* Corresponding Authors ABSTRACT This paper studies the geometric design of spatial open loop prismatic-revolute-revolute (PRR) robot manipulators. Four spatial positions and orientations are defined and the dimensions of the geometric parameters of the PRR manipulator are computed so that the manipulator will be able to place its end-effector at these four pre-specified locations. Denavit and Hartenberg parameters and 4x4 homogeneous matrices are used to formulate the design equations. Polynomial Elimination techniques are used to solve these equations and twelve geometrically different solutions are found.
منابع مشابه
Analytic Geometric Design of Spatial R-r Robot Manipulators
This paper studies the geometric design of spatial two degrees of freedom, open loop robot manipulators with revolute joints that perform tasks, which require the positioning of the end-effector in three spatial locations. This research is important in situations where a robotic manipulator or mechanism with a small number of joint degrees of freedom is designed to perform higher degree of free...
متن کاملGeometric Design of 3R Robot Manipulators for Reaching Four End-Effector Spatial Poses
In this paper, the four-precision-point geometric design problem of serial-link robot manipulators with three revolute joints is solved using a polynomial continuation method. At each precision point, the end-effector spatial locations are defined. The dimensions of the geometric parameters of the 3R manipulator are computed so that the manipulator’s end-effector will be able to reach these fou...
متن کاملSolving the Geometric Design Problem of Spatial 3R Robot Manipulators Using Polynomial Homotopy Continuation
In this paper, the geometric design problem of serial-link robot manipulators with three revolute (R) joints is solved using a polynomial homotopy continuation method. Three spatial positions and orientations are defined and the dimensions of the geometric parameters of the 3-R manipulator are computed so that the manipulator will be able to place its end-effector at these three pre-specified l...
متن کاملMultiobjective Design Optimization of 3–PRR Planar Parallel Manipulators
This paper addresses the dimensional synthesis of parallel kinematics machines. A multiobjective optimization problem is proposed in order to determine optimum structural and geometric parameters of parallel manipulators. The proposed approach is applied to the optimum design of a three-degree-of-freedom planar parallel manipulator in order to minimize the mass of the mechanism in motion and to...
متن کاملOn the Kinematic Analysis of Robotic Mechanisms
The kinematic analyses, of manipulators and other robotic devices composed of mechanical links, usually depend on the solution of sets of nonlinear equations. There are a variety of both numerical and algebraic techniques available to solve such systems of equations and to give bounds on the number of solutions. These solution methods have also led to an understanding of how special choices of ...
متن کامل