A miniature electronic nose system based on an MWNT-polymer microsensor array and a low-power signal-processing chip.

نویسندگان

  • Shih-Wen Chiu
  • Hsiang-Chiu Wu
  • Ting-I Chou
  • Hsin Chen
  • Kea-Tiong Tang
چکیده

This article introduces a power-efficient, miniature electronic nose (e-nose) system. The e-nose system primarily comprises two self-developed chips, a multiple-walled carbon nanotube (MWNT)-polymer based microsensor array, and a low-power signal-processing chip. The microsensor array was fabricated on a silicon wafer by using standard photolithography technology. The microsensor array comprised eight interdigitated electrodes surrounded by SU-8 "walls," which restrained the material-solvent liquid in a defined area of 650 × 760 μm(2). To achieve a reliable sensor-manufacturing process, we used a two-layer deposition method, coating the MWNTs and polymer film as the first and second layers, respectively. The low-power signal-processing chip included array data acquisition circuits and a signal-processing core. The MWNT-polymer microsensor array can directly connect with array data acquisition circuits, which comprise sensor interface circuitry and an analog-to-digital converter; the signal-processing core consists of memory and a microprocessor. The core executes the program, classifying the odor data received from the array data acquisition circuits. The low-power signal-processing chip was designed and fabricated using the Taiwan Semiconductor Manufacturing Company 0.18-μm 1P6M standard complementary metal oxide semiconductor process. The chip consumes only 1.05 mW of power at supply voltages of 1 and 1.8 V for the array data acquisition circuits and the signal-processing core, respectively. The miniature e-nose system, which used a microsensor array, a low-power signal-processing chip, and an embedded k-nearest-neighbor-based pattern recognition algorithm, was developed as a prototype that successfully recognized the complex odors of tincture, sorghum wine, sake, whisky, and vodka.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Miniature Electronic Nose System Based on Polymer/carbon Black Films

Introduction The ability to monitor and detect various chemical gases is important to many applications. One example is environmental monitoring, such as determining the air quality inside a room or closed chamber and detecting the presence and concentration of toxic or otherwise dangerous gases that may come from spills and leaks [1]. Monitoring and determining the constituents of a sample gas...

متن کامل

A Low Noise CMOS Readout Based on a Polymer-Coated SAW Array for Miniature Electronic Nose

An electronic nose (E-Nose) is one of the applications for surface acoustic wave (SAW) sensors. In this paper, we present a low-noise complementary metal-oxide-semiconductor (CMOS) readout application-specific integrated circuit (ASIC) based on an SAW sensor array for achieving a miniature E-Nose. The center frequency of the SAW sensors was measured to be approximately 114 MHz. Because of inter...

متن کامل

A Fully Integrated Range-Finder Based on the Line-Stripe Method

In this paper, an imaging chip for acquiring range information using by 0.35 μm CMOS technology and 5V power supply has been described. The system can extract range information without any mechanical movement and all the signal processing is done on the chip. All of the image sensors and mixed-signal processors are integrated in the chip. The design range is 1.5m-10m with 18 scales.

متن کامل

AVLSI compatible conducting polymer composite lbased "electronic nose" chip - Electron Devices Meeting, 2002. IEDM '02. Digest. International

The focus of this work would be to exploit the vapor detection technology developed recently at Caitech that fonus the basis for a low power, simple "electronic nose", In this work we have integrated the sensors, signal preprocessing, signal processing, and data analysis functions into a single, low power, low cost, nnos~ chip". Such a device could be implantable covertly or overtly onto suspec...

متن کامل

Towards a Chemiresistive Sensor-Integrated Electronic Nose: A Review

Electronic noses have potential applications in daily life, but are restricted by their bulky size and high price. This review focuses on the use of chemiresistive gas sensors, metal-oxide semiconductor gas sensors and conductive polymer gas sensors in an electronic nose for system integration to reduce size and cost. The review covers the system design considerations and the complementary meta...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Analytical and bioanalytical chemistry

دوره 406 16  شماره 

صفحات  -

تاریخ انتشار 2014