Auger electron microprobe analysis of the first steps of a Ni-20 Cr alloy oxidation
نویسندگان
چکیده
منابع مشابه
Microanalysis of thin oxide film formed by high-temperature oxidation of commercial Ni-Cr alloy containing Be for metal-porcelain bonding.
Thin oxide films formed on commercial metal/porcelain Ni-Cr alloy containing Be, were studied by using the electron probe microanalyzer (EPMA) with the glass lining technique and by the X-ray diffraction method with the Debye-Scherrer camera. Oxidation was restricted to form thin oxide films as follows; at 700•Ž for 5 minutes in air, at 1,000•Ž for 2 minutes in air, and at 1,000•Ž for 40 minute...
متن کاملNi@Pt core-shell nanoparticles as an improved electrocatalyst for ethanol electrooxidation in alkaline media
Core-shell nanostructures are emerging as more important materials than alloy nanostructures and have much more interesting potential applications in various fields. In this work, we demonstrated the fast and facile synthesis of core-shell nanoparticles consisting of Pt thin layer as the shell and Ni nanoparticles as the cores. The described method herein is suitable for large-scale and low-cos...
متن کاملUsing a Multi-disciplinary Approach, the First Electron Backscattered Kikuchi Patterns Were Captured for a Plutonium Alloy
Microstructural characterization of plutonium by electron backscattered diffraction (EBSD) has been previously elusive primarily because of the extreme toxicity and surface oxidation rates associated with plutonium metal. In this work, initial electron backscattered diffraction pattern (EBSP) observations of a plutonium-gallium (Pu-Ga) alloy were made. Samples were prepared using standard metal...
متن کاملNew Creep-Resistant Cast Alloys with Improved Oxidation Resistance in Water Vapor at 650–800°C
Cast stainless steel CF8C-Plus (19wt%Cr/12%Ni) has excellent creep properties, but limited oxidation resistance above 700°C in environments containing H2O. One strategy to improve the alloy oxidation performance is to increase the Cr and Ni concentration. Two new alloys, with, respectively, 21wt%Cr–15wt%Ni and 22wt%Cr–17.5wt%Ni were therefore developed and their long-term oxidation behaviors in...
متن کاملFormation and Evaluation of Oxidation Behavior of Zirconia- Aluminide Coating on Nickel- Based Alloy
Practical applications of thermal barrier coatings with aluminide bond-coats are limited due to oxide scale spallation of the aluminide coating under applied thermal stresses. Considering the positive effects of oxygen-active elements or their oxides on the high temperature oxidation behavior, in this research zirconia was introduced into an aluminide coating. For this purpose, a Watts type bat...
متن کامل