Optimization of Buckypaper-enhanced Multifunctional Thermoplastic Composites

نویسندگان

  • Zhongrui Li
  • Zhiyong Liang
چکیده

A series of flattened-nanotube reinforced thermoplastic composites are sizably fabricated as a function of buckypaper loading. The effects of the volume fraction, nanotube alignment and length on the tensile performance of the composites are factored into a general expression. The incorporation of self-reinforcing polyphenylene resin (Parmax) into a highly aligned buckypaper frame at an optimal weight ratio boosts the tensile strength and Young's modulus of the buckypaper/Parmax composite to 1145 MPa and 150 GPa, respectively, far exceeding those of Parmax and aligned buckypaper individually. The composite also exhibits improved thermal (>65 W/m-K) and electrical (~700 S/cm) conductivities, as well as high thermoelectric power (22 μV/K) at room temperature. Meanwhile, the composite displays a heterogeneously complex structure. The hexyl groups of Parmax noncovalently interact with the honeycomb structure of the flattened nanotube through π-stacking and CH-π interaction, correspondingly improving the dispersity of polymer on the nanotube surface and the interfacial stress transferring while the high alignment degrees of nanotube facilitate phonon and charge transport in the composites.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Electrical Conductivity and Thermal Properties of Functionalized Carbon Nanotubes / Polyurethane Composites

Multi-walled carbon nanotubes (MWCNTs) functionalized with amine and carboxyl groups were used to prepare polyurethane/ MWCNT nanocomposites in two distinct concentrations: a lower value of 1 mass% (spray coating) and a higher one of ~50 mass% (buckypaper based). The MWCNT-NH 2 sample contained only 0.5 mass% of amine groups, whereas MWCNT-COOH contained 5 mass% of carboxyl groups. The MWCNT fu...

متن کامل

Enhanced mechanical and electrical properties of carbon nanotube buckypaper by in situ cross-linking

Please cite this article in press as: Zhang J et al. Enhanced mechanical and electrical properties of carbon nanotube buckypaper by in linking. Carbon (2013), http://dx.doi.org/10.1016/j.carbon.2013.06.047 Jianwei Zhang , Dazhi Jiang *, Hua-Xin Peng , Faxiang Qin b,c a Department of Materials Science and Engineering, National University of Defense Technology, Changsha, Hunan 410073, People’s Re...

متن کامل

Fabrication of Silver doped Buckypaper and Investigation of its Properties

Microwave absorbing property of composites containing Ag nanoparticles filled multiwalled carbon nanotube buckypaper (Ag-BP) has been investigated. Buckypaper doped with silver was prepared by direct dispersion and filtration method. From the low temperature resistivity measurement it was found that increasing doping level decreases the electrical conductivity of the buckypaper. 30 wt. % and 40...

متن کامل

Study of fire retardant behavior of carbon nanotube membranes and carbon nanofiber paper in carbon fiber reinforced epoxy composites

Single-walled carbon nanotube (SWCNT) and multi-walled carbon nanotube (MWCNT) membranes (buckypaper) and carbon nanofiber (CNF) paper were incorporated onto the surface of epoxy carbon fiber composites, as proposed fire shields. Their flammability behaviors were investigated by a cone calorimeter. SWCNT buckypaper and CNF paper did not show notable improvement on fire retardancy. However, MWCN...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 7  شماره 

صفحات  -

تاریخ انتشار 2017