Multiple quasicrystal approximants with the same lattice parameters in Al-Cr-Fe-Si alloys

نویسندگان

  • Zhanbing He
  • Hua Li
  • Haikun Ma
  • Guowu Li
چکیده

By means of atomic-resolution high-angle annular dark-field scanning transmission electron microscopy, we found three types of giant approximants of decagonal quasicrystal in Al-Cr-Fe-Si alloys, where each type contains several structural variants possessing the same lattice parameters but different crystal structures. The projected structures of these approximants along the pseudo-tenfold direction were described using substructural blocks. Furthermore, the structural relationship and the plane crystallographic groups in the (a, c) plan of these structural variants was also discussed. The diversity of quasicrystal approximants with the same lattice parameters was shown to be closely related to the variety of shield-like tiles and their tiling patterns.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Cubic approximants in quasicrystal structures

2014 The regular deviations from the exact icosahedral symmetry, usually observed at the diffraction patterns of quasicrystal alloys, are analyzed. It is shown that shifting, splitting and asymmetric broadening of reflections can be attributed to crystalline phases with the cubic symmetry very close to the icosahedral one (such pseudo-icosahedral cubic approximants may be called the Fibonacci c...

متن کامل

Quasicrystal approximants with novel compositions and structures

We identify several new quasicrystal approximants in alloy systems in which quasicrystals have not been previously reported. Some occur in alloys with large size contrast between the constituent elements, either containing small Boron atoms, or large Ca/Eu atoms, leading to quasicrystal structures quite different from currently known systems where the size contrast is smaller. Another group of ...

متن کامل

High-Strength Ultra-Fine-Grained Hypereutectic Al-Si-Fe-X (X = Cr, Mn) Alloys Prepared by Short-Term Mechanical Alloying and Spark Plasma Sintering

In this work, Al-20Si-10Fe-6Cr and Al-20Si-10Fe-6Mn (wt %) alloys were prepared by a combination of short-term mechanical alloying and spark plasma sintering. The microstructure was composed of homogeneously dispersed intermetallic particles forming composite-like structures. X-ray diffraction analysis and TEM + EDS analysis determined that the α-Al along with α-Al15(Fe,Cr)₃Si₂ or α-Al15(Fe,Mn)...

متن کامل

مشخصه یابی ساختاری و مغناطیسی آلیاژهای (Fe65-Co35)100-xSix تولید شده به روش آلیاژسازی مکانیکی

Fe-Co alloys have unique magnetic applications. Fe50Co50 alloy has the highest saturation magnetization value among Fe-Co alloys. Moreover, the introduction of Si into Fe can result in a decrease of magnetic anisotropy. In this study, in order to utilize combined advantages of Si and Co, the effect of adding 10 and 20 at.% Si on the microstructural and magnetic properties of Fe65Co35 alloy wa...

متن کامل

Room Temperature Oxidation of Al-Cu-Fe and Al-Cu-Fe-Cr Quasicrystals

We have investigated formation of oxides on quasicrystalline and crystalline alloy surfaces of similar composition, in different oxidizing environments. This includes a comparison between a quaternary orthorhombic approximate of Al-Cu-Fe-Cr quasicrystal and the ternary AI-Cu-Fe quasicrystalline and crystalline phases. We noted that each sample showed the following common trends: preferential ox...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 7  شماره 

صفحات  -

تاریخ انتشار 2017