Synthesis and Characterization of Crystalline Silicon Carbide Nanoribbons

نویسندگان

  • Huan Zhang
  • Weiqiang Ding
  • Kai He
  • Ming Li
چکیده

In this paper, a simple method to synthesize silicon carbide (SiC) nanoribbons is presented. Silicon powder and carbon black powder placed in a horizontal tube furnace were exposed to temperatures ranging from 1,250 to 1,500°C for 5-12 h in an argon atmosphere at atmospheric pressure. The resulting SiC nanoribbons were tens to hundreds of microns in length, a few microns in width and tens of nanometers in thickness. The nanoribbons were characterized with electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction, Raman spectroscopy and X-ray photoelectron spectroscopy, and were found to be hexagonal wurtzite-type SiC (2H-SiC) with a growth direction of [101̄0]. The influence of the synthesis conditions such as the reaction temperature, reaction duration and chamber pressure on the growth of the SiC nanomaterial was investigated. A vapor-solid reaction dominated nanoribbon growth mechanism was discussed.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

SYNTHESIS AND CHARACTERIZATION OFSILICON CARBIDE NANO POWDER BYSOLGELPROCESSING

Abstract: SiC nano particles with mono dispersed distribution were synthesized by using of silicon alkoxides and phenolic resin as starting materials. After synthesis of sample, characterizations of the obtained powder were investigated via Fourier Transform Infrared Spectroscopy (FTIR) with 400-4000 cm-1, X-ray Diffractometry (XRD), Laser Particle Size Analyzing (LPSA), Si29 NMR analysis, Scan...

متن کامل

Scalable templated growth of graphene nanoribbons on SiC.

In spite of its excellent electronic properties, the use of graphene in field-effect transistors is not practical at room temperature without modification of its intrinsically semimetallic nature to introduce a bandgap. Quantum confinement effects can create a bandgap in graphene nanoribbons, but existing nanoribbon fabrication methods are slow and often produce disordered edges that compromise...

متن کامل

Heer Ballistic Transport in Graphene Nanoribbons

Graphene nanoribbons are essential components in future graphene nanoelectronics. However, in typical nanoribbons produced from lithographically patterned exfoliated graphene, the charge carriers travel only about 10 nanometers between scattering events, resulting in minimum sheet resistances of about 1 kW In contrast 40 nm wide graphene nanoribbons that are epitaxially grown on silicon carbide...

متن کامل

Graphite, graphene on SiC, and graphene nanoribbons: Calculated images with a numerical FM-AFM

BACKGROUND Characterization at the atomic scale is becoming an achievable task for FM-AFM users equipped, for example, with a qPlus sensor. Nevertheless, calculations are necessary to fully interpret experimental images in some specific cases. In this context, we developed a numerical AFM (n-AFM) able to be used in different modes and under different usage conditions. RESULTS Here, we tackled...

متن کامل

One-dimensional single-crystalline bismuth oxide micro/nanoribbons: morphology-controlled synthesis and luminescent properties.

Based on a facile vapor-phase transport method without any catalyst and template, one-dimensional single-crystalline bismuth oxide (Bi2O3) micro/nanoribbons were fabricated on silicon substrates in large quantities and morphology-controlled fabrication of Bi2O3 was achieved from a single precursor. The widths of Bi2O3 ribbons varied from 0.2 to 20 microm depending on the deposition temperatures...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 5  شماره 

صفحات  -

تاریخ انتشار 2010