Nonlinear absorption of SWNT film and its effects to the operation state of pulsed fiber laser.
نویسندگان
چکیده
We study a single-wall carbon nanotube (SWNT) Polyvinyl alcohol (PVA) composite as a saturable absorber (SA) for pulse generation in Yb-doped fiber lasers. The saturable absorption and optical limiting (OL) characteristics of the SWNT device are investigated. By combing these two nonlinear effects, we find out for the first time, to the best of our knowledge, that mode-locking can be obtained in the dissipative soliton regime at low pumping followed by Q-switching at high pumping, which is quite different from conventional pulse dynamic evolutions. The Q-switched state operating at higher pump powers is due to the OL effect. The inverted operating fiber laser can be applied in various potential applications such as versatile material processing, optical communication and radar system etc.
منابع مشابه
Design and Application of a Photoacoustic Sensor for Monitoring the Laser Generated Stress Waves in Optical Fiber
Measurement of stress transients generated by a 400ns pulsed HF laser in an infrared fluoride glass fiber has been made using fast time – response piezoelectric film transducer. Acoustic signals up to 12 mV with frequencies ranging in megahertz generated by 21 mJ laser pulse when passed through the fiber axis in the linear region. It is shown that useful information such as onset of non - linea...
متن کاملAnalysis of Steady-State Brillouin Nonlinearity in High-Power Fiber Lasers
In the present work, a theoretical analysis of the first-order of stimulatedBrillouin scattering (SBS) in a double-clad (DC) ytterbium (Yb)-doped silica fiber laserin unidirectional pumping mode is presented.An accurate simulation for calculating SBS nonlinearity is performed by considering thecoupled differential rate equations for pump, signal and Stokes powers, as wel...
متن کاملInfluence of shielding gas composition on weld profile in pulsed Nd:YAG laser welding of low carbon steel
Weld area and weld depth/width ratio can be considered to be of the most important geometrical factors in pulsed laser welding. The effects of carbon dioxide and oxygen additions to the argon shielding gas on the weld properties in pulsed laser welding of low carbon steel is investigated. Presence of carbon dioxide and oxygen up to 10 and 15 percent respectively decreases the weld geometrical f...
متن کاملFabrication, characterization and mode locking application of single-walled carbon nanotube/polymer composite saturable absorbers
We present the fabrication of a high optical quality single-walled carbon nanotubes (SWNTs) polyvinyl alcohol (PVA) composite film. The composites demonstrate strong saturable absorption at ∼1.5 μm, the spectral range for optical communications. By measuring the nonlinear transmission of a sub-picosecond pump pulse through the film, we were able to deduce a saturation fluence of ∼13.9 μJ/cm and...
متن کاملInfluence of shielding gas composition on weld structure in pulsed Nd: YAG laser welding
This work studied the effect of additions of carbon dioxide to argon shielding gas on the weld shape and microstructure of ST14 steel in pulsed Nd: YAG laser welding. By additions of carbon dioxide up to 15%,the weld area and depth/width ratio decreases while rising of carbon dioxide up to 25% causes increasing of weld area and depth/width ratio. It is observed that the weld metal microstructur...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Optics express
دوره 22 14 شماره
صفحات -
تاریخ انتشار 2014