Hydrogen Peroxide Bleaching of Canola Straw Chemimechanical Pulp
نویسندگان
چکیده
Canola straw can be used as a raw material for the production of chemimechanical pulp (CMP). In this work, chemimechanical pulp was first produced from canola straw, and then the bleaching performance of the produced chemimechanical pulp was investigated under different conditions (dosages of NaOH and Na2SO3, time, and temperature). The results showed that the yield of chemical pretreatment in the CMP process varied between 57.6% and 64.9%, while the total yield of the process was between 54.1% and 61.9%. Subsequently, the CMP pulp produced via applying 4% NaOH and 8% Na2SO3 at 145 °C for 15 min was bleached with H2O2. The results showed that pulps bleached via applying one stage of 3% H2O2, 3% NaOH, 6% sodium silicate, 0.5% MgSO4, and 0.3% DTPA for 150 min possessed the highest brightness of 60.8% ISO, which is suitable for container board production.
منابع مشابه
Comparative study on hydrogen peroxide bleaching of soda-organosolv and Kraft rice straw pulps
Rice straw was cooked with three levels of alkali content (12, 14 and 16%) in cooking liquor by soda-organosolv (ethanol, diethylene glycol, dimethyl formamide) process. The effect of alkali addition on yield, kappa number, brightness and viscosity of organosolv unbleached pulps was studied. The TCF bleachability of these organosolv pulps and kraft pulp was carried out using a simple three stag...
متن کاملThe effect of wheat straw bleaching on some mechanical properties of wheat straw/LDPE biocomposites
Using biocomposites containing wheat straw (WS) and synthetic polymers like polyethylene (PE) has gained tremendous popularity, but its application in the packaging industry is not substantial. Due to the prevalence of raw WS color which manifests itself in the WS/LDPE biocomposite, the present investigation is dedicated to fabricate a bleached WS/LDPE composite. Thus, raw WS and the pulp of WS...
متن کاملApplication of Polyoxometalate in Hydrogen Peroxide Bleaching under Acidic Conditions
The modified bleaching sequence OPAPPO from short-sequence bleaching OAP and OQP was studied in an effort to achieve higher quality straw pulp (with brightness 84.5% and acceptable viscosity 669 mL/g), which will be appropriate for more situations than straw pulp as presently produced. Though the OP and PO stages are recognized as the key processes used to increase the pulp’s brightness, additi...
متن کاملThe Effects of H2O2 Bleaching and DTPA Spraying on the Brightness Stability of Hornbeam CMP Pulp following Accelerated Irradiation Aging
In this research, hornbeam chips were cooked under chemimechanical pulp (CMP) conditions, and the pulps were prepared at a yield level of 85%. The CMP pulps were separately bleached with hydrogen peroxide and sodium dithionite with and without treatment with DTPA. Then 60 gr/m 2 handsheets were made. The goal was to determine whether complementary bleaching with sodium dithionite improves optic...
متن کاملIMPACT OF ACID WASHING AND CHELATION ON Mg(OH)2- BASED HYDROGEN PEROXIDE BLEACHING OF MIXED HARDWOODS CMP AT A HIGH CONSISTENCY
The removal of transition metal ions is crucial for improving the efficiency of subsequent peroxide bleaching. Acid-washing and chelation have been proposed for such a purpose. However, their influences on the Mg(OH)2-based peroxide bleaching of hardwood pulps at a high consistency have not been well documented in the literature. In this work, we studied the influence of acid-washing using sulf...
متن کامل