Coupling Model of Energy Flow and Material Flow in SKS Lead Smelting
نویسندگان
چکیده
This paper studied the coupling model of material flow and energy flow in the production process of lead smelting enterprises, and established the mathematical model for material flow and energy flow to resolve optimization problems. From the point of energy flow, the paper analyzed three kinds of energy flow changes which have an effect on the enterprise products. Through calculation and analysis, it has been found that there is 38.42% energy-saving potential in this enterprise. Separately from the material flow and energy flow angle, the paper put forward five aspects suggestions to reduce the energy consumption of the enterprise products.
منابع مشابه
A Dynamic Simulation of Annular Multiphase Flow during Deep-water Horizontal Well Drilling and the Analysis of Influential Factors
A gas kick simulation model for deep-water horizontal well with diesel-based drilling fluid is presented in this paper. This model is mainly based on the mass, momentum, and energy conservation equations. The unique aspect of this model is the fluid-gas coupling and the change of mud properties after the gas influx from the formation. The simulation results show that the gas in an annulus disso...
متن کاملPositive Coupling Effect in Gas Condensate Flow Capillary Number Versus Weber Number
Positive coupling effect in gas condensate reservoirs is assessed through a pure theoretical approach. A combination of linear stability analysis and long bubble approximation is applied to describe gas condensate coupled flow and relative permeability, thereof. The role of capillary number in gas condensate flow is clearly expressed through closed formula for relative permeability. While the m...
متن کاملFE-Based Analysis of Hot Forming Process Using the Flow Stress Prediction Model
In hot forming process, the workpiece undergoes plastic deformation at high temperature and the microstructure of the workpiece changes according to the plastic deformation. These changes affect the mechanical properties of workpiece. In order to optimize this process, both the plastic deformation of workpiece and its microstructural changes should be taken into consideration. Since material be...
متن کاملCOUPLING MODEL FOR MULTI-COMPONENT GAS PERMEATION PROCESS
A gas permeation model (Coupling Model) has been developed which has the flexibility to be used for different membrane module configurations. The aim of this work is to predict the performance of a single stage gas separation process using membranes and provide a comprehensive description of process parameters like flow rates, composition, stage cut and stream pressure. The significant feature ...
متن کاملCFD Study and Energy Optimization of Industrial Double-Cyclone in HDPE Drying Process
In this paper, a double-cyclone is used as a gas-solid separator in the fluid bed-drying process to prepare dry HDPE powder from a wet feed of 56000 kg/hr. The quality of dry HDPE depends mainly on particles behavior and flow pattern in the dryer which affect the double-cyclones as an effective equipment in this process. Controlling of the inlet carrier gas causes excellent flow pattern, desire...
متن کامل