Synthesis and biocompatibility of an experimental glass ionomer cement prepared by a non-hydrolytic sol-gel method.

نویسندگان

  • Lucas da Fonseca Roberti Garcia
  • Fernanda de Carvalho Panzeri Pires-de-Souza
  • Juliana Mazzoneto Teófilo
  • Alexandre Cestari
  • Paulo Sergio Calefi
  • Katia Jorge Ciuffi
  • Eduardo José Nassar
چکیده

The aims of this study were to demonstrate the synthesis of an experimental glass ionomer cement (GIC) by the non-hydrolytic sol-gel method and to evaluate its biocompatibility in comparison to a conventional glass ionomer cement (Vidrion R). Four polyethylene tubes containing the tested cements were implanted in the dorsal region of 15 rats, as follows: GI - experimental GIC and GII - conventional GIC. The external tube walls was considered the control group (CG). The rats were sacrificed 7, 21 and 42 days after implant placement for histopathological analysis. A four-point (I-IV) scoring system was used to graduate the inflammatory reaction. Regarding the experimental GIC sintherization, thermogravimetric and x-ray diffraction analysis demonstrated vitreous material formation at 110oC by the sol-gel method. For biocompatibility test, results showed a moderate chronic inflammatory reaction for GI (III), severe for GII (IV) and mild for CG (II) at 7 days. After 21 days, GI presented a mild reaction (II); GII, moderate (III) and CG, mild (II). At 42 days, GI showed a mild/absent inflammatory reaction (II to I), similar to GII (II to I). CG presented absence of chronic inflammatory reaction (I). It was concluded that the experimental GIC presented mild/absent tissue reaction after 42 days, being biocompatible when tested in the connective tissue of rats.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

An investigation on the effect of acetone and DMF as solvent on synthesis of P2O5-CaO-Na2O-TiO2 glass powder by sol-gel method

The sol-gel synthesis method allows greater control over glass morphology at a relatively low processing temperature (200 °C) in comparison with melt-derived glasses. In present study, phosphate-based glasses with the general formula of (P2O5)55-(CaO)25-(Na2O)10-(TiO2)10 was synthesized via a novel and facil...

متن کامل

Effect of surface roughness on coating SiO2-P2O5-CaO-ZrO2 upon Zirconium by Sol-Gel Method

Zirconium and its alloys have many applications in orthopedic medicine and compared to stainless steel, titanium and other metals used in the manufacture of implants has higher strength and corrosion resistance. Research shows that the method of preparation and surface modification before coating process has a significant impact on improving the metal implants among which include the sandblasti...

متن کامل

Effect of Solvent properties on Crystallinity and Morphology of Octavinyl-POSS: A Comparative Study

Polyhedral Oligomeric Silsesquioxanes (POSSs) are a class of hybrid structures synthesized through hydrolytic condensation (Sol-Gel method) of trifunctional silane monomers under specific conditions. Octavinyl silsesquioxane (OVS) nanostructures are comprised of a rigid inorganic silica core surrounded by vinyl functional groups with an under-developed synthesis procedure. Generally, POSS morph...

متن کامل

Reinforcement of Glass Ionomer Cement: Incorporating with Silk Fiber

The aim of this study was to synthesis of glass ionomer-silk fiber composite and to evaluate the effect of adding natural degummed silk fiber on the mechanical properties of glass ionomer cement (GIC). For this purpose, natural degummed silk fibers with 1 mm in length and 13-16 µm in diameter were added to the ceramic component of a commercial glass ionomer cement in 1, 3 and 5 wt. %. Compressi...

متن کامل

ساخت و مشخصه یابی نانوکامپوزیت گلاس آینومر- فورستریت و بررسی تأثیر میزان نانوذرات فورستریت بر خواص مکانیکی و زیست فعالی آن

The objective of this study was to synthesize glass ionomer–forsterite nanocomposite and study the effect of incorporating forsterite nanoparticles to the ceramic part of glass ionomer cement in order to improve mechanical properties and bioactivity. So, Forsterite nanoparticles were made by the sol-gel process using different weight percentages added to the ceramic part of commercial GIC (F...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Brazilian dental journal

دوره 21 6  شماره 

صفحات  -

تاریخ انتشار 2010