Apf or Konus Drift Tube Structures for Medical Synchrotron Injectors - a Comparision
نویسندگان
چکیده
Tumor therapy with light ion beams like Carbon out of a synchrotron is a topical accelerator application. In all designs the layout of the injector linac is an important factor with respect to construction and operation costs as well as to the operation performance of such a medical facility. Two alternative linac approaches which keep the number of components and setting parameters as low as possible are discussed. In both cases the Interdigital Htype drift tube structure is used for acceleration of C ions from 0.3 MeV/u to 7 MeV/u. The "Combined Zero Degree Structure" KONUS is used in one design; the other approach is "Alternating Phase Focusing" APF without any magnetic quadrupoles for transverse focusing. Both designs were investigated with the LORASR code. As the same linac should also provide protons with beam intensities of a few mA, the comparision was extended towards the capability of accelerating intense ion beams.
منابع مشابه
Design of a Carbon Injector for a Medical Accelerator Complex
A design study of a 7 MeV/u C injector LINAC for a synchrotron for light-ion tumour therapy is presented. The injector consists of a 14.5 GHz ECR ion source, a LEBT line, a 216 MHz RFQ structure of 1.2 m length for acceleration from 6 keV/u to 300 keV/u and a subsequent 216 MHz IH drift tube LINAC of 4.0 m length for acceleration to 7 MeV/u. The IH structure consists of four drift tube sections...
متن کاملKONUS BEAM DYNAMICS DESIGN OF A 70 mA , 70 MeV PROTON CH - DTL FOR GSI - SIS 12 *
Abstract The future scientific program at GSI needs a dedicated proton injector into the synchrotron SIS, in order to increase the proton intensity of the existing UNILAC/SIS12 combination by a factor of 70, resulting in 7x1012 protons in the synchrotron. A compact and efficient 352 MHz RFQ CH-DTL combination based on novel structure developments for RFQ and DTL was worked out. For DTL's operat...
متن کاملAnalyzing the Behavior of Hybrid Steel System of Tube in Tube with Bracing and Belt Truss
Nowadays, due to the escalation in construction of high-rise structures, the need for selecting a proper resistant structural system against earthquake and wind has increased significantly. These systems should show an optimized use of materials and should be presented as a hard and efficient structure. A good example of a high efficient system in high-rise buildings can be indicated is, the tu...
متن کاملSuperconducting H-mode Structures for Medium Energy Beams
Room temperature IH-type drift tube structures are used at different places now for the acceleration of ions with mass over charge ratios up to 65 and velocities between 0.016 c and 0.1 c. These structures have a high shunt impedance and allow the acceleration of very intense beams at high accelerating gradients. The overall power consumption of room temperature IHmode structures is comparable ...
متن کاملSeismic Retrofitting RC Structures with Precast Prestressed Concrete Braces- ABAQUS FEA Modeling
Precast prestreesed concrete braces are a new method for seismic strength of Concrete Structures which has the following benefits: a) no wet concrete work in construction site b) No bolt or anchorage to the existing frame c) easy to apply d) short construction period e) low construction cost, to evaluate seismic performance of strengthened structure a model consist of existing frame and concret...
متن کامل