Research on Energy-Saving Optimization for the Performance Parameters of Rural-Building Shape and Envelope by TRNSYS-GenOpt in Hot Summer and Cold Winter Zone of China

The aim of this paper is to optimize the building shape parameters and envelope parameters influencing the rural building energy consumption in cold winter and hot summer climate. Several typical models are established and optimized by integrated TRNSYS and GenOpt. Single-objective optimization has provided guidance to the multi-dimensional optimization. Building shape and envelope parameters are considered simultaneously by multi-dimensional optimization. Results of the optimization showed significant reduction in terms of EC (energy consumption). When O (building orientation) was SW (south by west) 10◦, LWR (length-width ratio) was 1.1, WWRS (window-wall ratio in south) with the range of 0.6–0.8, ITE (insulation thickness of exterior wall) and ITR (insulation thickness of roof) was 0.05 m and 0.08 m respectively, the building had minimal energy consumption. The results also indicated that the optimal EWT (exterior window type) was plastic single-frame Low-E insulating glazing filled with inert gas, and the optimal shape of building is Re (rectangle). An effective method was provided to optimize the design of the rural building for the purpose of reducing building energy consumption in cold winter and hot summer climate.