High-power thulium fiber laser Q switched with single-layer graphene.

نویسندگان

  • Yulong Tang
  • Xuechao Yu
  • Xiaohui Li
  • Zhiyu Yan
  • Qi Jie Wang
چکیده

We report high-power 2 μm Tm3+ fiber lasers passively Q switched by double-piece single-layer graphene transferred onto a glass plate. Through manipulating intracavity laser beam size and increasing pump ratios, an average power of 5.2 W is directly achieved from the laser oscillator with an optical-to-optical slope efficiency of 26%. The laser pulse energy can be as high as ∼18  μJ, comparable to that from actively Q-switched fiber lasers. The narrowest pulse width is 320 ns, and the pulse repetition rate can be tuned from tens of kilohertz to 280 kHz by changing the pump power. To the best of our knowledge, this is the highest average power and pulse energy, as well as the narrowest pulse width, from graphene-based Q-switched 2 μm fiber lasers.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

High-power passively Q-switched thulium fiber laser with distributed stimulated Brillouin scattering.

We report a novel passively Q-switched 2 μm Tm(3+) fiber laser simply by distributed stimulated Brillouin scattering with an all-fiber configuration. The maximum output power is 2.49 W with an optical-to-optical slope efficiency of 12%, and the laser wavelength is centered at ~1991 nm with a spectral width of >10 nm. The single pulse energy can be over 50 μJ with a pulse width of about 20 ns, a...

متن کامل

A Monolithic Thulium Doped Single Mode Fiber Laser with 1.5ns Pulsewidth and 8kW Peak Power

Here we report a compact monolithic 2000nm pulsed laser with a single spatial mode output, ~1.5ns pulse duration, 8kW peak power and >200mW average power at 20 kHz repetition rate. The gain-switched laser, consisting of a pair of fiber Bragg gratings and 0.5m of thulium-doped single cladding fiber, was core pumped by a high peak power pulsed 1.5 m laser. When the input pulse energy of the 20 kH...

متن کامل

Mode-locked thulium-bismuth codoped fiber laser using graphene saturable absorber in ring cavity.

We demonstrate mode locking of a thulium-bismuth codoped fiber laser (TBFL) operating at 1901.6 nm, using a graphene-based saturable absorber (SA). In this work, a single layer graphene is mechanically exfoliated using the scotch tape method and directly transferred onto the surface of a fiber pigtail to fabricate the SA. The obtained Raman spectrum characteristic indicates that the graphene on...

متن کامل

A Q-switched erbium-doped fiber laser with a graphene saturable absorber - IOPscience

We demonstrate a simple, compact and low cost Q-switched erbium-doped fiber laser (EDFL) exploiting a graphene saturable absorber (GSA) for possible applications in metrology, sensing and medical diagnostics. The EDFL operates at 1560 nm with repetition rates of 31.3 kHz and 25 kHz with GSA1 and GSA2, respectively, at pump power of 120 mW. The repetition rate is smaller with a lower pump power....

متن کامل

High Power Q-Switched Thulium Doped Fibre Laser using Carbon Nanotube Polymer Composite Saturable Absorber

We have proposed and demonstrated a Q-switched Thulium doped fibre laser (TDFL) with a 'Yin-Yang' all-fibre cavity scheme based on a combination of nonlinear optical loop mirror (NOLM) and nonlinear amplified loop mirror (NALM). Unidirectional lasing operation has been achieved without any intracavity isolator. By using a carbon nanotube polymer composite based saturable absorber (SA), we demon...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Optics letters

دوره 39 3  شماره 

صفحات  -

تاریخ انتشار 2014