Dielectric characteristic of nanocrystalline Na0.5K0.5NbO3 ceramic green body
نویسندگان
چکیده
Dielectric spectroscopy was applied to porous nanocrystalline Na0.5K0.5NbO3 (NKN) ceramic green body, wherein influences of percolation effect and water adsorption at pore surface of the ceramic green body on dielectric response were examined over wide temperature (150 to 450 K) and frequency (100 Hz to 1 MHz) ranges. Dielectric permittivity of the ceramic green body is about 2–3 orders of magnitude higher than that of pure NKN powder or NKN ceramic. Furthermore, the high dielectric permittivity and high humidity sensitivity of the ceramic green body can appear again with aging a period of time in air. The data from this investigation make potential applications for NKN as a giant dielectric material or a humidity sensing material.
منابع مشابه
Synthesis of Nanocrystalline Titanium Carbide by Spark Erosion
Interest in nanocrystaJline ceramic powders is due to their attractive processing and mechanical properties. The disadvantages of conventional ceramics, such as large internal flaws, negligible ductility, hightemperature processing, can possibly be eliminated or minimized by starting with finegrained powders. A previous study on the sinterability of nanocrystalline ceramic powders showed that h...
متن کاملElectro-Optical Na0.5K0.5NbO3 Films
Ferroelectric oxides are a group of advanced electronic materials with a wide variety of properties useful in applications such as memory devices, resonators and filters, infrared sensors, microelectromechanical systems, and optical waveguides and modulators. Among the oxide perovskite-structured ferroelectric thin film materials, sodium potassium niobate or Na0.5K0.5NbO3 (NKN) has recently eme...
متن کامل" Wet vs. Dry " Multilayer Ceramic Capacitor Manufacturing Processes
The heart of a multilayer ceramic capacitor (MLC) is a layered monolith of dielectric ceramic and electrode metals as shown in expanded form in Figure 1. The ceramic monolith has terminations added to provide the finished capacitor shown in a cut-away view in Figure 2. KEMET, like the majority of today’s MLC manufacturers uses a “dry” or “tape” process for stacking the layers in the MLCs follow...
متن کاملThe effect of slip casting parameters on the ultrafine microstructure and density of pore-free YAG ceramic obtained by vacuum sintering
In this study, the effect of slip casting parameters on the ultrafine microstructure and the density of pore-free YAG ceramic was evaluated. A stable, high concentrated aqueous YAG slurry using Dolapix-CE64 as a dispersant was prepared. The effect of dispersant concentration as well as the solid load on the stability and rheological behavior of the slurry was also studied. The optimal dispersan...
متن کاملInvestigation the Effect of Niobium Oxide Additive on the Dielectric Properties of Bismuth Titanate
Bismuth titanate ceramic has been attracted as a lead-free ferroelectric due to its high Curie temperature in high temperature applications as well as high frequency applications. In this study, the effect of niobium oxide as an additive on the microstructure and dielectric properties of bismuth titanate ceramic was investigated. For this purpose, niobium oxide was added to bismuth titanate, sy...
متن کامل