Characteristics of Submerged Flow Below Gate With Sill in Non-Prismatic Channels
نویسندگان
چکیده
The characteristics of submerged flow below vertical gate with sill upstream of horizontal diverging channel reach are analyzed based on experimental investigation. The experimental program is conducted in a laboratory flume with 10 cm wide, 31 cm deep and 3.0 m long. A diverging channel reach with fixed length and constant divergence angle is used. Polygonal sills with constant height, constant upstream slope and variable downstream slope are used under the gate. These sills are tested under wide range of similar submerged flow conditions to investigate the effect of sill slope on the flow characteristics. Also, a particular sill is tested under different heights to address the effect of sill height on the flow characteristics. Both the effects of submergence and the under-gate Froude number on the flow below the gate are discussed. Different flow regimes are considered (Supercritical, critical and subcritical flow). It is found that the presence of sill under the gate upstream of diverging channel reach has a remarkable effect on the discharge coefficient of the gate. It is noticed that the submergence ratio and the upstream head ratio are not able to explain the observed variations (or scatter of data) in the discharge coefficients. These variations or scatters are completely explained by the under-gate Froude number and the differential head ratio.
منابع مشابه
اثر سر ریز انتهایی بر نیم رخ سطح آب در کانال جانبی غیر منشوری:راهنمای طراحی
Side channel spillways have a common usage in conveyance and distribution networks, high dams, water and wastewater treatment plants, and surface drainage networks. A side channel carries spatially varied flow with increasing discharge and their water surface profiles is a main feature in the design process. Usually, the bottom width of the channel is flared in the flow direction and an end sil...
متن کاملاثر سر ریز انتهایی بر نیم رخ سطح آب در کانال جانبی غیر منشوری:راهنمای طراحی
Side channel spillways have a common usage in conveyance and distribution networks, high dams, water and wastewater treatment plants, and surface drainage networks. A side channel carries spatially varied flow with increasing discharge and their water surface profiles is a main feature in the design process. Usually, the bottom width of the channel is flared in the flow direction and an end sil...
متن کاملمطالعه جریان همزمان از زیر یک دریچه کشویی و روی یک سرریز لبه تیز ذوزنقهای
The combined system of gate and weir is used for flow measurement in open channels. But in case the passing water has floating material and sediment it damages their performance and hence error of measurement will increase. In order to solve this problem, weir and gate can be combined and a concentrated hydraulic system known as weir-gate can be developed, thus allowing sediments transportation...
متن کاملEvaluation of Energy Dissipation and Flow Rate of Elliptical-Lopac Gate under Sudden Transition Condition
Lopac gates, with the benefits of easy installation, automation and the ability to pass sediments and floating objects, are among the new structures considered for water level regulation and flow control in the irrigation canals. Converting the shape of the gate from a rectangular one to an elliptical one allows the flow rate to be increased by the same water level. In the present study, the ef...
متن کاملTwin Plate Weir: A Flow Measuring Device (TECHNICAL NOTE)
For efficient use of water, accurate measurement of flow in (field/laboratory) channels is required for many water resource projects. The present work is aimed to study the flow characteristics of a twin plate weir (two sharp-crested plates are placed one behind the other at some distance) under free and submerged flow conditions. Experiments are performed with four spacing of the twin plate we...
متن کامل