Optimization and Innovation of Screw Joints of Micron-Wood-Fiber Molded Products
نویسندگان
چکیده
Micron-wood-fiber molded products are new kinds of high strength man-made wooden products. They are innovative products among molded fiber products nowadays. This paper studied a new method to design their screw joints using optimal design. It has combined the optimal design with reliability design ingeniously. The CAD programming method was put forward, which can optimize the structural parameters of micron-wood-fiber molded products, and may be used on the strength design and the check of innovation for new products. The new calculating method and software had provided effective design method for screw joints of micron-wood-fiber molded products. It would increase the calculating efficiency and precision greatly.
منابع مشابه
Dynamic Mechanical Analysis of Compatibilizer Effect on the Mechanical Properties of Wood Flour-High-Density Polyethylene Composites
In this study, effect of MAPE (maleic anhydride polyethylene) as the compatibilizer on the mechanical properties of wood-flour polyethylene composites has been investigated by using Dynamic Mechanical Analysis (DMA). Composites were made at 25% and 50% by weight fiber contents and 1% and 2% compatibilizer respectively. Controls were also made at the same fiber contents without the compatibilize...
متن کاملOptimization of Physicochemical Characteristics of Corn-Based Extruded Snacks Containing Pomegranate Seed Powders
Background and Objectives: The extruded snacks with high content of calorie and fat and low content of protein, fiber is considered as a deleterious and harmful foodstuff for most of the consumers. Today, various techniques have been proposed to improve the quality of snacks. The use of fruits processing by-products to extruded snacks is one of the most important technologies that is proposed. ...
متن کاملAcetylation of wood – A review
Wood is a porous three dimensional, hydroscopic, viscoelastic, anisotropic bio-polymer composite composed of an interconnecting matrix of cellulose, hemicelluloses and lignin with minor amounts of inorganic elements and organic extractives. Some, but not all, of the cell wall polymer hydroxyl groups are accessible to moisture and these accessible hydroxyls form hydrogen bonds with water. As the...
متن کاملAN OPTIMIZATION PROCEDURE FOR CONCRETE BEAM-COLUMN JOINTS STRENGTHENED WITH FRP
This paper illustrates an optimization procedure of concrete beam-column joints subjected to shear that are strengthened with fiber reinforced polymer (FRP). For this aim, five different values have been considered for length, width and thickness of the FRP sheets which created 125 different models to strengthen of concrete beam-column joints. However, by using response surface methodology (RSM...
متن کاملScrew-holding, internal bond, and related properties of composite board products for furniture and cabinet manufacture: a survey of the Literature
This paper discusses selected properties of particleboard, hardboard, medium-densi ty fiberboard (MDF), and plywood related to their use in furniture and cabinet manu facture. Properties covered are screw-hold ing, internal bond, density profile, and edge appearance. Studies of direct screw with drawal of panel products indicate that re sistance to withdrawal from the edge is 75 to 80 perc...
متن کامل