Power Factor Correction Using Fuzzy Logic Control
نویسندگان
چکیده
Harmonic pollution and low power factor in power systems caused by power converters have been a great concern. To overcome these problems several converter topologies and control schemes have been proposed in recent years. This paper is proposed to study the control techniques for such converters to improve the Power Factor (PF) and reduce total harmonic distortion (THD) in the input current with output voltage regulation. A new fuzzy logic control strategy for boost PFC is presented in this paper. Here the controlling action was established through a fuzzy Logic controller. The proposed Fuzzy Logic control system is a two input one output Fuzzy Logic Controller. The proposed PFC control is derived based on Boost converter operates at continuous conduction mode and the switching frequency is much higher than the line frequency so that input voltage can be assumed as a constant during one switching cycle.
منابع مشابه
Power Factor Correction Based On Fuzzy Logic Controller With Average Current-Mode For DC-DC Boost Converter
Power Factor Correction (PFC) provides well-known benefits to electric power systems. These benefits include power factor correction, poor power factor penalty utility bill reductions, voltage support, release of system capacity, and reduced system losses. The performance of fuzzy logic controller only depends on the selection of membership function and Inference of fuzzy rules, fuzzy logic con...
متن کاملPower Factor Correction using Valley-Fill SEPIC Topology with Fuzzy Logic Control
This paper deals with a new single ended primary inductance converter (SEPIC) for power factor correction (PFC). The proposed converter is used in combination with SEPIC and a valley fill circuit. The valley fill circuit improves the efficiency of the SEPIC by reducing the harmonics in the supply mains. The power factor is also enhanced compared to the conventional PFC converters. It uses the s...
متن کاملClosed Loop Control of Bridgeless Cuk Converter Using Fuzzy Logic Controller for PFC Applications
This paper is based on the bridgeless single-phase Ac– Dc Power Factor Correction (PFC) converters with Fuzzy Logic Controller. High frequency isolated Cuk converters are used as a modular dc-dc converter in Discontinuous Conduction Mode (DCM) of operation of Power Factor Correction. The aim of this paper is to simplify the program complexity of the controller by reducing the number of fuzzy se...
متن کاملFuzzy and Adaptive Control Strategies of Voltage Source Converter for Correction of Power Factor
technology led to design of faster power electronic switches with higher ratings.These devices have been used to improve the performance of various power converter systems. To improve the power quality and power flow control the Voltage Source Converter (VSC) has been widely used in power systems. This work presents and compares the performance of three controllers namely vector control, Adapti...
متن کاملPi, Fuzzy Logic Controlled Shunt Active Power Filter for Three-phase Four-wire Systems with Balanced, Unbalanced and Variable Loads
This paper presents a fuzzy logic, PI controlled shunt active power filter used to compensate for harmonic distortion in three-phase four-wire systems. The shunt active filter employs a simple method for the calculation of the reference compensation current based on Fast Fourier Transform. The presented Shunt Active Power filter is able to operate in balanced, unbalanced and Variable load condi...
متن کامل