A Novel Approach to Recycle Energy Using Piezoelectric Crystals
نویسنده
چکیده
with the increasing demand for utilization of energy resources, there has been a deflation in the availability of resources and there have been many methods of recycling of energy resources .It is our responsibility to ensure that we do not deplete all the energy resources leaving our future generations facing dangerous hazards. Our paper is one such attempt to reduce that burden. The method being employed by us is a new concept, which not only utilizes the principle of piezoelectricity to harvest energy but it also employs pyroelectric crystals and microcontroller to create a kind of feedback, with a battery getting charged automatically ,till it becomes fully charged. With piezo electric crystals it is possible to harvest energy from vibrating structures.Pyroelectric effect occurs when change in temperature causes flow of charges. These two effects are used to charge the various components being used in this experiment while remaining energy is being used to charge the battery. Our model aims to create a cyclic flow of energy, thus ensuring very less or no wastage of energy.
منابع مشابه
Analytical Approach for Vibration Analysis of a Microsensor with Two layers of Silicon and Piezoelectric based on MCST
The vibration analysis is an important step in the design and optimization of microsensors. In most of the cases, COMSOL software is employed to consider the size-dependency on the dynamic behavior in the MEMS sensors. In this paper, the Modified Couple Stress Theory (MCST) is used to capture the size effect on dynamic behavior in a microsensor with two layers of the silicon and piezoelectric. ...
متن کاملBuckling of Piezoelectric Composite Cylindrical Shell Under Electro-thermo-mechanical Loading
Using principle of minimum total potential energy approach in conjunction with Rayleigh-Ritz method, the electro-thermo-mechanical axial buckling behavior of piezoelectric polymeric cylindrical shell reinforced with double-walled boron-nitride nanotube (DWBNNT) is investigated. Coupling between electrical and mechanical fields are considered according to a representative volume element (RVE)-ba...
متن کاملImproving Power Density of Piezoelectric Vibration-Based Energy Scavengers
Vibration energy harvesting with piezoelectric materials currently generate up to 300 microwatts per cm2, using it to be mooted as an appropriate method of energy harvesting for powering low-power electronics. One of the important problems in bimorph piezoelectric energy harvesting is the generation of the highest power with the lowest weight. In this paper the effect of the shape and geometry ...
متن کاملPower optimization of a piezoelectric-based energy harvesting cantilever beam using surrogate model
Energy harvesting is a conventional method to collect the dissipated energy of a system. In this paper, we investigate the optimal location of a piezoelectric element to harvest maximum power concerning different excitation frequencies of a vibrating cantilever beam. The cantilever beam oscillates by a concentrated sinusoidal tip force, and a piezoelectric patch is integrated on the beam to gen...
متن کاملAn Investigation into Resonant Frequency of Triangular V-Shaped Cantilever Piezoelectric Vibration Energy Harvester
Power supply is a bottle-neck problem of wireless micro-sensors, especially where the replacement of batteries is impossible or inconvenient. Now piezoelectric material is being used to harvest vibration energy for self-powered sensors. However, the geometry of a piezoelectric cantilever beam will greatly affect its vibration energy harvesting ability. This paper deduces a remarkably precise an...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2011