Characterisation of products from pyrolysis of waste sludges
نویسندگان
چکیده
The pyrolysis of waste sludges was investigated using thermogravimetry/mass spectrometry (TG/MS) and a fixed-bed reactor. Two types of sludge were used, namely mixed sludge and oil sludge. In TGA/MS measurements, two degradation steps were observed. Degradation of organic structures, in sludge took place in the first step, while inorganic materials in sludge were mainly decomposed in a second step (above 500 8C). In a fixed-bed reactor, the catalytic effect of inorganic matter in addition to organic matter was monitored the quality and yield of products from pyrolysis. Pyrolysis of oil sludge produced a larger amount of oil containing more aliphatic compounds and a high calorific value. On the other hand, pyrolysis of mixed sludge gave a smaller amount of oil being rich in polar compounds. The gaseous products from pyrolysis consist of high amount of combustable gases. Landfilling was found to be the best alternative to dispose off the pyrolytic char obtained from pyrolysis. q 2005 Elsevier Ltd. All rights reserved.
منابع مشابه
Evolution of phosphorus complexation and mineralogy during (hydro)thermal treatments of activated and anaerobically digested sludge: Insights from sequential extraction and P K-edge XANES.
(Hydro)thermal treatments of sewage sludge is a promising option that can simultaneously target safe waste disposal, energy recovery, and nutrient recovery/recycling. The speciation of phosphorus (P) in sludge is of great relevance to P reclamation/recycling and soil application of sludge-derived products, thus it is critical to understand the effects of different treatment techniques and condi...
متن کاملCatalytic Pyrolysis of Waste Tyre Rubber into Hydrocarbons Via Base Catalysts
The waste tyres represent a source of energy and valuable hydrocarbon products. Waste tyres were pyrolysed catalytically in a batch reactor under atmospheric pressure. The effects of basic catalysts (MgO and CaCO3) were studied on the pyrolysis products. The distribution ratio of gas, liquid and char with MgO and CaCO3 were 24.4:39.8:35.8 wt % and 32.5:32.2:35.2 wt % r...
متن کاملEffect of temperature, heating rate and zeolite-based catalysts on the pyrolysis of high impact polystyrene (HIPS) waste to produce fuel-like products
Pyrolysis of high impact polystyrene (HIPS) waste has been investigated under different process parameters, such as temperature, heating rate and types of zeolitic catalysts to produce valuable liquid products. Liquid, gas and coke as products of pyrolysis and aromatic, naphthene, olefin and paraffin as liquid components were obtained and their molecular weight distributions were studied with c...
متن کاملProduction of pyrolytic liquids from industrial sewage sludges in an induction-heating reactor.
With the application of induction-heating, the pyrolytic experiments have been carried out for three sewage sludges from the food processing factories in an externally heated fixed-bed reactor. The thermochemical characteristics of sludge samples were first analyzed. The results indicated that the calorific value had about 15 MJ/kg on an average, suggesting that it had a potential for biomass e...
متن کاملHazardous solid wastes generated in the cleanup of air and water.
Air and water pollution control programs sometimes result in production of solid wastes that are difficult to manage. The sludges from sewage treatment plants and flue gas scrubbers are two examples. In many coastal communities, there is no alternative to ocean dumpling of sewage sludges for the foreseeable future. The use of sludges as soil conditioners, their conversion to fuels by pyrolysis,...
متن کامل