Selecting and Using RS-232, RS-422, and RS-485 Serial Data Standards - AN723
ثبت نشده
چکیده
Three common serial data standards, RS-232, RS-422, and RS-485, are described by specification and electrical interface. Cable termination techniques, use of multiple loads, daisy-chaining of RS-232, conversion of RS-232 to RS-485, conversion of RS-485 to RS-232, and RS-232 port-powered RS-485 conversions are described.
منابع مشابه
Application Note 972 Inter-Operation of Interface Standards
When communication is required between systems that support different interfaces is required, a detailed study of driver output and receiver input characteristics is required to determine if direct “electrical” inter-operation is possible. The results of this study may also conclude that some translation devices are required for inter-operation. This may include passive devices or active device...
متن کاملHow Far and How Fast Can You Go with RS-485? - AN3884
Designers of industrial datacom systems often ask, what is the most cost-effective implementation for multidropped, medium-speed, serial data communications? What data rates can be reliably achieved over what distance, and how? The design trade-off has always been less distance at a higher rate, or greater distance at a lower rate. So, the crucial question is: how far can you reliably transmit ...
متن کاملDevelopment and Implementation of a Sensor Network to Monitor Fermentation Process Parameter in Tea Processing
Fermentation is extremely a crucial process which is primarily responsible for tea quality. It is an oxidation process where tea leaves change colour and smell. Relative humidity (RH) and temperature are two important physical parameters which play a crucial role in producing good quality tea. This work is an attempt to develop and implement a monitoring system for fermentation room of tea fact...
متن کاملThe Design of Hls Voltage Network Monitoring System Based on Ad7756
The features of a voltage/energy measuring IC AD7756 are introduced in this paper. By using this IC, we designed a voltage network monitoring system for HLS. With the bus interface of RS485, The system can monitor 64 sites simultaneously. Each site module includes 2 ADCs, a voltage reference, a temperature sensor and a relative DSP. It can set the voltage alarm threshold when working, and sampl...
متن کاملThe Practical Design of Constructing Data Transition Interface with ZigBee WSN and RS-485 Wired Interface - Example with Small-scaled Wind-power Electricity Generator System
─The purpose of this study was to explore the related practical techniques of monitoring and controlling system in designing renewable energy system, especially for Small-scaled wind-power generator. Recently, the whole world was actively developing replaced energy to solve the economic development and daily-life necessities problems resulting from gradually lacking of oil. Taiwan government wa...
متن کامل