Semi Analytical Finite Element Analysis for Ultrasonic Focusing in a Pipe
نویسندگان
چکیده
Guided wave focusing has been developed as a promising technique for defect detection in pipeworks, where non-axisymmetric flexural modes are tuned so that ultrasonic energy can be focused at a target point in a pipe. If a defect is located at the target point, large amplitude reflected waves can be observed. In this study, the focusing phenomenon is analyzed using a semi-analytical finite element method where a region of a pipe is divided in the thickness direction into the cylindrical subdivisions and is analytically treated in the circumferential and longitudinal directions. Visualization of the calculation results reveals that focusing occurs gradually in the vicinity of the target point.
منابع مشابه
Ultrasonic guided waves reflection from simple dent in pipe for defect rate estimation and parameters determination of axisymmetric wave generation source
In this paper, the reflection of ultrasonic guided waves from simple dent in pipes has been investigated using finite element method and the relationship between reflection coefficient of these waves and deformation rate has been determined. Also, the effect of the parameters of wave generation source on the generated wave field has been investigated using normal modes expansion method. At firs...
متن کاملAnalysis of flexural mode focusing by a semianalytical finite element method.
Focusing is one of the most promising techniques for the detection of small defects in pipe works, in which guided waves including longitudinal and flexural modes are tuned so that ultrasonic energy can be focused at a target point in a pipe, and analysis of reflected waves gives information on defects such as location and size. In this paper, the focusing technique is discussed by way of a sim...
متن کاملDuctile Failure and Safety Optimization of Gas Pipeline
Safety and failure in gas pipelines are very important in gas and petroleum industry. For this reason, it is important to study the effect of different parameters in order to reach the maximum safety in design and application. In this paper, a three dimensional finite element analysis is carried out to study the effect of crack length, crack depth, crack position, internal pressure and pipe thi...
متن کاملA Continuum Shell-beam Finite Element Modeling of Buried Pipes with 90-degree Elbow Subjected to Earthquake Excitations
In the current work, the seismic analysis of bent region in buried pipes is performed, and effects of soil properties and modeling methods on pipe’s response are investigated. To do this task Beam, Beam-Shell Finite Element modeling and a Continuum shell FE models of a 90 degrees elbow are employed. In the Beam model, the pipe is simulated by beam elements while combined shell-beam elements a...
متن کاملInvestigation on the Ultrasonic Tube Hydroforming in the Bulging Process Using Finite Element Method
In ultrasonic tube hydroforming, the tube is hydro formed while the ultrasonic vibration is applied to the die. Prior studies provide experimental proof that ultrasonic tube hydroforming reduces corner radius, improves lubrication and uniform thickness. Use of ultrasonic vibration can decrease friction at the tube-die interface. Few attempts have been made to analyze the wire drawing while the ...
متن کامل