Session 1: Plant material in wastewater treatment INTEGRATED BIOREMEDIATION OF TNT CONTAMINATED GROUNDWATER

Screening Effective Factors in Slurry Phase Bioremediation of 2,4,6-Trinitrotoluene (TNT) Contaminated Soil

Improved removal of Trinitrotoluene (TNT) from contaminated soil by inducing aerobic process: kinetic and chemical byproducts

This study describes the biological degradation of TNT by using induced aeration. Three plastic reactors were used. In each reactor 3 kg of soil were used. In order to increase the porosity of the soil, sawdust was added to soil. Textile wastewater treatment plant sludge was also added to soil. TNT at the concentrations of 1000 mg/kg of soil was added thereafter. Rhamnolipid biosurfactant at th...

MALDI-TOF MS for the Identification of Cultivable Organic-Degrading Bacteria in Contaminated Groundwater near Unconventional Natural Gas Extraction Sites

Groundwater quality and quantity is of extreme importance as it is a source of drinking water in the United States. One major concern has emerged due to the possible contamination of groundwater from unconventional oil and natural gas extraction activities. Recent studies have been performed to understand if these activities are causing groundwater contamination, particularly with respect to ex...

Bioremediation of 2,4,6-trinitrotoluene contaminated soil in slurry and column reactors.

The bioremediation of 2,4,6-trinitrotoluene (TNT) contaminated soil was performed on a laboratory scale. To compare bioremediation methods, a soil slurry reactor and a soil column reactor were operated and the effects of supplemental sources were investigated. Optimal conditions for the two bioremediation systems for the removal of TNT were obtained. In the soil slurry reactor, about 60% of the...

Mathematical modeling of the integrated process of mercury bioremediation in the industrial bioreactor

The mathematical model of the integrated process of mercury contaminated wastewater bioremediation in a fixed-bed industrial bioreactor is presented. An activated carbon packing in the bioreactor plays the role of an adsorbent for ionic mercury and at the same time of a carrier material for immobilization of mercury-reducing bacteria. The model includes three basic stages of the bioremediation ...