Rheological Behaviors of Polymer Impregnated Maple Veneer
نویسندگان
چکیده
The objective of this study was to determine rheological behaviors of maple veneer plastic composite (MVPC) prepared by full cell preparation technology through the use of a rotational rheometer. The results showed that at 25 to 105 °C, the storage modulus G' and loss modulus G'' of the MVPC were apparently higher than that of the control. In the range 105 to 210 °C, the storage modulus G' of the MVPC was basically the same as that of the control, and the loss modulus G'' was slightly higher than that of the control. At 105 °C, the Tanδ curve of the MVPC had an obvious peak, which indicated that the glass transition temperature (Tg) of the MVPC was about 105 °C. The rheological behavior of the MVPC with different impregnation weight gain rates showed that the MVPC with a 55% impregnation weight gain rate had higher G', G'', and Tanδ.
منابع مشابه
Electron-Beam Curing of Acrylate/Nanoparticle Impregnated Wood Products
This study investigated the feasibility of using an electron beam (EB) process to cure chemically impregnated wood products. Maple wood planks were impregnated with the low-viscosity resins 1,6 hexanediol dimethacrylate (HDDA) and trimethylolpropane trimethacrylate (TMPTA). The addition of nanoparticles into the formulation was also studied. The impregnated wood was then cured by EB irradiation...
متن کاملThe effect of the target structure and composition on the ejection and transport of polymer molecules and carbon nanotubes in matrix-assisted pulsed laser evaporation
Matrix-assisted pulsed laser evaporation (MAPLE) is a prominent member of a broad and expanding class of laser-driven deposition techniques where a matrix of volatile molecules absorbs laser irradiation and provides the driving force for the ejection and transport of the material to be deposited. The mechanisms of MAPLE are investigated in coarse-grained molecular dynamic simulations focused on...
متن کاملEffect of Micro Glass Flake on Morphological and Rheological Behaviour of Epoxy Vinyl Ester Composite Coatings
In the present work, attempts were made to investigate the reinforcement and treatment effect of GF on morphological and rheological behaviour of GF/epoxy vinyl ester composites. GF was incorporated into epoxy vinyl ester resin by sonication, and mechanical agitation. Rheological and morphological properties were studied as a function of particle treatment and size distributions. The dispersion...
متن کاملA review on melt-state viscoelastic properties of polymer nanocomposites.
The mixing of polymer matrices with nanoparticles to form composite materials has been an area of great research interest. The mechanical and rheological properties of such composite materials are directly related to the properties of the matrix polymer, the properties of the nano-filler, the strength and nature of the interfacial interactions between the polymer matrix and the filler, and fina...
متن کاملStudy on the Optical and Rheological properties of polymer- layered Silicate Nanocomposites
This review reports recent advances in the field of polymer–layered silicate nano composites. Thesematerials have attracted both academic and industrial attention because they exhibit dramaticimprovement in properties at very low filler contents. Herein, the structure, preparation andproperties of polymer–layered silicate nanocomposites are discussed in general, and finally the effectof clay na...
متن کامل