The Use of a Deep Electrolytic Tank as a Lifting-Surface Calculator

نویسنده

  • H. S. WARD
چکیده

An investigation of a deep electrolytic tank, applied as a lifting-surface calculator, has been made. The reasons for the initial choice of apparatus, and its subsequent behaviour are .detailed. The calculator was developed for use with the investigation of plane surfaces, plane control surfaces and a symmetrically cambered wing. The results have been compared with existing theoretical and experimental work. As a consequence, it seems that the calculator could be put to a more general use.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Multiple Fault Diagnosis Research on Motors in Aluminum Electrolytic Based on ICA Feature Extraction

Motors as the actuator in the aluminum electrolysis process, mainly used for control the lifting of the anode to control the cell voltage, make the electrolytic tank keep in the best condition, once the motors failed, slot voltage will be out of control. This paper study on the fault of the motors in the process of aluminum electrolysis. In this paper adopts the EMD algorithm for various stator...

متن کامل

Comparing the Effects of Deep and Surface Aeration Methods on Density and Type of Airborne Bactria and Fungi in Municipal Wastewater Treatment Plant

Background and purpose: Emission of bioaerosols from wastewater treatment plants is a potential hazard to human health. In this study aimed at investigating the effects of surface and deep aeration techniques on density and type of airborne bacteria and fungi in two municipal wastewater treatment plants. Materials and methods: This descriptive cross-sectional study was done in two wastewater t...

متن کامل

Effect of Plasma Electrolytic Oxidation Process as a Pretreatment on Corrosion Resistance of Polymeric Coatings Applied on Mg Alloy

In this study, Plasma Electrolytic Oxidation (PEO) at three frequencies of 500, 1000 and 3000 Hz was applied on Mg surface and the effect of PEO surface preparation on protective behavior of three types of epoxy, fusion bond epoxy (FBE) and polyurethane coatings was investigated. The microstructural and protective properties of PEO coatings were studied by SEM, potentiodynamic polarization and ...

متن کامل

Effect of Plasma Electrolytic Oxidation Process as a Pretreatment on Corrosion Resistance of Polymeric Coatings Applied on Mg Alloy

In this study, Plasma Electrolytic Oxidation (PEO) at three frequencies of 500, 1000 and 3000 Hz was applied on Mg surface and the effect of PEO surface preparation on protective behavior of three types of epoxy, fusion bond epoxy (FBE) and polyurethane coatings was investigated. The microstructural and protective properties of PEO coatings were studied by SEM, potentiodynamic polarization and ...

متن کامل

Control capability of electrolytic concentration on refractive index and dielectric constant of porous Silicon layers

Porous Silicon (PS) samples have been prepared by electrochemical anodization of p-type silicon wafer by varying HF concentrations in the electrolytic solution. The structural, surface morphological, optical and surface composition analysis of the prepared samples were done by X-ray diffraction (XRD), Scanning electron microscopy (SEM), Photoluminescence (PL) and Fourier transform infr...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2002