Design and Implement Printed Rectangular Monopole Broadband Antenna for Wireless Networks
نویسندگان
چکیده
This paper tells how to construct rectangular monopole antenna which will be printed on printed circuit board (PCB). The antenna behaves as planar monopole antenna as it has rectangular patch and ground plane which lies in same plane of PCB. Also this antenna is a broadband antenna because its ratio bandwidth lies under broadband category. In comparison with monopole antenna broadband planer monopole antenna has more advantages in terms of their cost, ease of fabrication and bandwidth. As many wireless Networks require large bandwidth to carry huge amount of data at a time through medium so as to increase the data rate. We have designed a printed rectangular monopole antenna for wireless application at 2.4 GHz such that it can be used for commercial frequency such as Bluetooth, Wi-max, HSPDA, and Wi-Fi. Parameters of presented antenna are same as monopole antenna but with improve bandwidth.
منابع مشابه
Techniques to Improve Bandwidth of Rectangular Planar Monopole Antenna
This paper gives information about construction of planar rectangular monopole antenna on Printed Circuit Board (PCB). Behaviour of such planar antenna is same as the rectangular patch antenna with finite ground plane which lies in same plane of given PCB. The designed antenna is a broadband antenna as its ratio bandwidth falls under broadband category. In comparison with monopole antenna broad...
متن کاملA Novel Small E–Ring Shaped Monopole Antenna with Dual Band-Notch Function for UWB Wireless Communications
This paper presents an E-ring shaped printed monopole antenna for UWB applications with dual notched bands performance. In order to generate single frequency band notch function, we applied a U-ring shaped monopole antenna, and by inserting a rectangular ring in the centre of it an E-ring shaped radiating patch created and a dual band-notch function can be achieved. The measured bandwidth of th...
متن کاملEvolution Process of a Broadband Coplanar- Waveguide-fed Monopole Antenna for Wireless Customer Premises Equipment
In this paper a design process of a broadband printed monopole antenna using stepped cut at four corners (CSFC) technique is proposed. The CSFC is a technique that four corners a patch (rectangular/square) of planar monopole antennas are cut in order to enhance the impedance bandwidth. The technique can be used to design any different types of planar monopole antenna in specific frequency range...
متن کاملA Multiband Multiple-input Multiple-output Antenna System for Long Term Evolution and Wireless Local Area Networks Handsets
A novel multiband multiple-input-multiple-output (MIMO) antenna system is proposed. The MIMO antenna system consists of two antenna elements, each of which comprises of three radiators: a driven monopole, an S-shaped strip and an inverted F-shaped strip and occupies footprint of 15x18.5x0.8 mm3 only. The driven monopole acts as a quarter-wave monopole and stimulate higher mode resonance. The tw...
متن کاملA WIDEBAND PRINTED MONOPOLE ANTENNA FOR 2.4-GHz WLAN APPLICATIONS
A planar monopole antenna suitable for broadband wireless communication is designed and developed. With the use of a truncated ground plane, the proposed printed monopole antenna offers nearly 60% 2:1 VSWR bandwidth and good radiation characteristics for the frequencies across the operating band. A parametric study of the antenna is performed based on the optimized design, and a prototype of th...
متن کامل