Optical crossover phenomenon due to a central 908-twist defect in a chiral sculptured thin film or chiral liquid crystal

نویسندگان

  • BY FEI WANG
  • AKHLESH LAKHTAKIA
  • F. Wang
چکیده

We present a theoretical analysis of a remarkable phenomenon evinced by a periodic structurally chiral material—for example, a chiral sculptured thin film (STF) or a chiral liquid crystal—with a central 908-twist defect illuminated with normally incident, circularly polarized light. Based on the coupled-wave theory (CWT), an approximate but closed-form solution of the relevant boundary-value problem is obtained in terms of a 4! 4 CWT transmission matrix. The CWT transmission matrix is decomposed into two terms. The first term favours total transmission in the central part of the Bragg regime of the axially excited, structurally chiral material, while the second term favours total reflection in the whole Bragg regime. When the thickness of the structurally chiral material is relatively small, the second term is dominated by the first, which gives rise to a co-handed transmittance peak in the centre of the Bragg regime. As the thickness increases, the second term becomes significant and interferes with the first term such that the transmission matrix is isomorphic to that of a defect-free structurally chiral material—except in a tiny wavelength-regime wherein the LN-norms of the two terms become identical to engender the total-reflection feature. Hence, the co-handed transmittance peak diminishes (and eventually vanishes) as the thickness increases and is replaced by a cross-handed reflectance peak. The bandwidths of the two peaks depend, in different ways, on the local birefringence of the structurally chiral material.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Chiral Optical Tamm States: Temporal Coupled-Mode Theory

The chiral optical Tamm state (COTS) is a special localized state at the interface of a handedness-preserving mirror and a structurally chiral medium such as a cholesteric liquid crystal or a chiral sculptured thin film. The spectral behavior of COTS, observed as reflection resonances, is described by the temporal coupled-mode theory. Mode coupling is different for two circular light polarizati...

متن کامل

Director Structures in a Chiral Nematic Slab: Threshold Field and Pitch Variations

Abstract The liquid crystal director distribution is determined for a confined chiral nematic slab. The molecular director distribution of the field-controlled chiral nematic slab is directly calculated. The director profiles for the tilt and the twist angles, under different applied fields, are calculated in the slab with weak boundary conditions. Then, the dependence of the threshold field on...

متن کامل

Dyakonov–Tamm wave at the planar interface of a chiral sculptured thin film and an isotropic dielectric material

Surface waves, named here as Dyakonov–Tamm waves, can exist at the planar interface of an isotropic dielectric material and a chiral sculptured thin film (STF). Due to the periodic nonhomogeneity of a chiral STF, the range of the refractive index of the isotropic material is smaller but the range of the propagation direction in the interface plane is much larger, in comparison to those for the ...

متن کامل

Quantification of optical pulsed–plane–wave–shaping by chiral sculptured thin films

The durations and average speeds of ultrashort optical pulses transmitted through chiral sculptured thin films (STFs) were calculated using a finite–difference time–domain algorithm. Chiral STFs are a class of nanoengineered materials whose microstructure comprises parallel helicoidal nanowires grown normal to a substrate. The nanowires are ∼10–300 nm in diameter and ∼1–10 μm in length. Duratio...

متن کامل

Engineering the Phase Speed of Surface–plasmon Wave at the Planar Interface of a Metal and a Chiral Sculptured Thin Film

The solution of a boundary–value problem formulated for a modified Kretschmann configuration shows that the phase speed of a surface–plasmon wave guided by the planar interface of a sufficiently thin metal film and a chiral sculptured thin film (STF) depends on the vapor incidence angle used while fabricating the chiral STF by physical vapor depoistion. Therefore, it may be possible to engineer...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2005