PIV measurements of an air jet impinging on an open rotor-stator system

نویسندگان

  • Thien Nguyen
  • Julien Pellé
  • Souad Harmand
  • Sébastien Poncet
چکیده

The current work experimentally investigates the flow characteristics of an air jet impinging on an open rotor-stator system with a low non-dimensional spacing, G = 0.02, and with a very low aspect ratio, e/D = 0.25. The rotational Reynolds numbers varied from 0.33 × 10 to 5.32 × 10, while the jet Reynolds numbers ranged from 17.2×10 to 43×10. Particle image velocimetry (PIV) measurements were taken along the entire disk diameter in three axial planes. From the obtained PIV velocity fields, the flow statistics were computed. A recirculation flow region, which was centered at the impingement point and possessed high turbulence intensities, was observed. Local peaks in root-mean-square fluctuating velocity distributions appeared in the recirculation region and near the periphery, respectively. Proper orthogonal decomposition (POD) analysis was applied to the cases of the jet impinging on the rotor with and without rotation to reveal the coherent structures in the jet region.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Review of fluid flow and convective heat transfer within rotating disk cavities with impinging jet

Fluid flow and convective heat transfer in rotor-stator configurations, which are of great importance in different engineering applications, are treated in details in this review. The review focuses on convective heat transfer in predominantly outward air flow in the rotor-stator geometries with and without impinging jets and incorporates two main parts, namely, experimental/theoretical methodo...

متن کامل

LDA Experimental Data of Three-Poster Jet Impingement System

During its near-ground hovering phase a Short Take-Off and Vertical Landing (STOVL) aircraft creates a complex three-dimensional flow field between jet streams, the airframe surface and the ground. A proper understanding and numerical prediction of this flow is important in the design of such aircraft. In this paper an experimental facility, used to gather validation data suitable for testing C...

متن کامل

Experimental and 3D Finite Element Analysis of a Slotless Air-Cored Axial Flux PMSG for Wind Turbine Application

In this research paper, the performance of an air-cored axial flux permanent magnet synchronous generator is evaluated for low speed, direct drive applications using 3D finite element modeling and experimental tests. The structure of the considered machine consists of double rotor and coreless stator, which results in the absence of core losses, reduction of stator weight and elimination of cog...

متن کامل

Modeling of microburst outflows using impinging jet and cooling source approaches and their comparison

Microbursts have been simulated and studied using different physical and numerical modeling methods. In the present study, the steady impinging jet model was comprehensively studied by using a 2-footdiameter (0.61 m) microburst simulator available in the Department of Aerospace Engineering at Iowa State University. Point measurements and Particle Image Velocimetry (PIV) results revealed a detai...

متن کامل

Nusselt Number Measurement of Air Flow between Grooved Rotor and Stator of a Generator

In this article, turbulent flow heat transfer in the air gap between rotor and stator of a generator under nonhomogeneous heat flux is studied experimentally. The rotor consists of four symmetrical triangular grooves. The stator surface is smooth and does not include any grooves. The relative heat flux between the rotor and the stator is 1 to 3. Temperature and heat flux are measured locally at...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2017