Factors and Causes That Influence the Springback Intensity in the Case of Cylindrical and Conical Draw Parts Made from Steel Sheets
نویسنده
چکیده
ABSTRACT The cold plastic forming of metal sheets generates a undesired phenomenon known as springback. Springback occurs after the tools were removed and the forming forces become equal to zero – and leads to a shape of the final part different from the theoretical ones. The study and analysis of the factors that influence this phenomenon is useful for the accurate design of the forming processes and forming tools. The present paper performs an analysis of the factors that influence the springback phenomenon in the case of the cylindrical and conical drawn parts made from steel sheets.
منابع مشابه
Analysis of the Residual Stresses Distribution in the Case of Drawn Parts Made from Steel Sheets
The residual stresses that occur in the machined parts after the tools removing are the main cause that determines the springback of the draw parts made from metal sheets. Hence, to investigate this instability phenomenon it must be known the state of residual stresses developed in the part by its machining. But, the experimental investigation of the residual stress distribution in the case of ...
متن کاملU-Bending Analysis with an Emphasis on Influence of Hardening Models
In this paper the effect of different hardening models in simulating the U-bending process for AA5754-O and DP-Steel, taking a benchmark of NUMISHEET 93 2-D draw bending, has been discussed. The hardening models considered in simulations are: isotropic hardening, pure (linear) kinematic hardening and combined (nonlinear kinematic) hardening. The influence of hardening models on predicting sprin...
متن کاملSpringback Analysis in Advanced High Strength Steel Using a New Flexible Semi-industrial Tool Geometry, the Flex-rail A.andersson
The automotive industry is using more and more of Advanced High Strength Steel in order to reduce the weight of the car. Since this will generate more springback, it is of vital importance to be able to predict the amount of springback in the parts. Otherwise, many late changes have to be made in order to fit the parts in their position. In order to increase the ability to understand and test t...
متن کاملInfluence of draw restraining force on the springback in advanced high strength steels
Advanced high strength steels (AHSS) are engineered to have both high strength and enhanced formability characteristics. Yet, the formed components undergo springback due to elastic recovery after removal of the forming tools. This severely affects the dimensional accuracy of the part. Many techniques have been evolved to deal with springback. A simple approach is to design forming tools that c...
متن کاملInfluence of Rolling on Microstructure and Mechanical Properties of Bronze-Steel Explosive Welded Sheets
In this paper, the microstructure and mechanical properties of the plain carbon steel-bronze interface of explosive welding and rolling were investigated. Explosive connection was done at two stop distances and with two different thicknesses of explosive material. Rolling of the welded composite was done at both ambient and preheated temperatures of 300 °C and with a constant thickness reductio...
متن کامل