High speed and high power polarization insensitive germanium photodetector with lumped structure.
نویسندگان
چکیده
We propose and demonstrate a high speed and high power polarization insensitive germanium photodetector (Ge PD) with lumped structure based on related parallel Ge absorption regions. Two absorption regions are double sides illuminated to optimize the space charge density and the two dimensional (2D) grating coupler is adopted for both coupling and polarization independent operation. Being different from previous reported high power scheme with separate absorption areas, the proposed structure is specifically designed with doubled but related Ge absorption regions, forming the equivalent parallel resistor and thus the parasitic parameter can be engineered to ensure a simultaneous large bandwidth. The bandwidth is measured to be >35 GHz, while the maximum current density is measured to be 1.152 mA/μm3. The dark current and the responsivity of the proposed Ge PD are measured to be 1.82 μΑ and 1.06 A/W. Modulated signals experimentally validate the high speed operation and doubled power handling capacity for the proposed scheme. Furthermore, the bit error rate results show the superior performance for the proposed Ge PD at high photocurrent.
منابع مشابه
Vertical p-i-n germanium photodetector with high external responsivity integrated with large core Si waveguides.
We report a vertical p-i-n thin-film germanium photodetector integrated on 3microm thick large core silicon-on-insulator (SOI) waveguides. The device demonstrates very high external responsivity due to the low fiber coupling loss to the large core waveguides. The germanium width and thickness are carefully designed to achieve high responsivity yet retain high-speed performance. Even with fiber ...
متن کاملNanometre-scale germanium photodetector enhanced by a near-infrared dipole antenna
A critical challenge for the convergence of optics and electronics is that the micrometre scale of optics is significantly larger than the nanometre scale of modern electronic devices. In the conversion from photons to electrons by photodetectors, this size incompatibility often leads to substantial penalties in power dissipation, area, latency and noise. A photodetector can be made smaller by ...
متن کاملCD-insensitive PMD monitoring based on RF power measurement.
We propose and experimentally demonstrate a chromatic dispersion (CD)-insensitive first-order polarization mode dispersion (PMD) monitoring method based on radio-frequency (RF) power measurement. In high-speed (>10-GSym/s) transmission systems, a narrowband fiber Bragg grating (FBG) notch filter filters out the optical components at 10GHz away from the carrier. After square-law detection, the 1...
متن کامل1. Photodetectors for silicon photonic integrated circuits
Silicon-based photonic components are especially attractive for realizing low-cost photonic integrated circuits (PICs) using high-volume manufacturing processes (Heck et al., 2013). Due to its transparency in the telecommunications wavelength bands near 1310 and 1550 nm, silicon is an excellent material for realizing low-loss passive optical components. For the same reason, it is not a strong c...
متن کاملImproved RF Power Extraction from 1.55�m Ge/Si n-i-p Photodiodes with Load Impedance Optimization
High power photodiodes (PDs) improve signal fidelity in high-speed optoelectronic communications links by eliminating a post amplifier stage, which reduces noise figure, decreases RF insertion loss, and increases spur-free dynamic range [1][2]. Recent efforts have focused on developing photodiodes with high power handling capabilities, and a photodiode with a compression current of 199 mA has b...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Optics express
دوره 24 9 شماره
صفحات -
تاریخ انتشار 2016